Raspberry Pi 1.54inch LCD Bookworm-Lite Display and Touch

Copy spotpear_240x320_st7789.dtbo to /boot/overlays/ directory】

sudo cp spotpear_240x240_st7789_lcd1inch54.dtbo /boot/overlays/

Edit config.txt configuration file】

sudo nano /boot/firmware/config.txt

Disable KMS】

#dtoverlay=vc4-kms-v3d

#max_framebuffers=2

Add the following configuration at the end of the file】

dtparam=spi=on

dtoverlay=spotpear_240x240_st7789_lcd1inch54

hdmi_force_hotplug=1

max_usb_current=1

hdmi_group=2

hdmi_mode=87

hdmi_cvt 480 480 60 6 0 0 0

hdmi_drive=2

display_rotate=0

Set CLI automatic login】

sudo raspi-config nonint do_boot_behaviour B2

Noto: This command has optional parameters

B1 - Boot to console, requiring login

B2 - Boot to console, logging in automatically

B3 - Boot to desktop, requiring login

B4 - Boot to desktop, logging in automatically

Note: Make sure the username of the Raspberry Pi is pi, otherwise it will not log in automatically

Switch to X11】

sudo raspi-config nonint do_wayland W1

Note: This command has optional parameters

W1 - Use the X11 backend

W2 - Use the Wayland backend

Download, compile and install fbcp】

sudo apt update

sudo apt-get install git -y

sudo git clone https://github.com/tasanakorn/rpi-fbcp.git

cd ./rpi-fbcp/

sudo mkdir -m 777 ./build

cd ./build/

sudo apt install libraspberrypi-dev -y

sudo apt-get install cmake -y

sudo cmake ..

sudo make

sudo install fbcp /usr/local/bin/fbcp

Set auto-start startx and fbcp】

sudo nano ~/.bash_profile

Note: If there is no .bash_profile file, create one yourself

Add the following code to the bottom of the .bash_profile file】

if [ "$(cat /proc/device-tree/model | cut -d ' ' -f 3)" = "5" ]; then

# Raspberry Pi 5B configuration

export FRAMEBUFFER=/dev/fb1

startx 2> /tmp/xorg_errors

else

# Non-Raspberry Pi 5B configuration

export FRAMEBUFFER=/dev/fb0

sleep 20

fbcp &

startx 2> /tmp/xorg_errors

fi

The above configuration will take effect after restart】

sudo reboot

Note: After setting ~/.bash_profile configuration, the system will take longer each time it restarts, and SSH will also take a while to enter;

Step 4】Configure Touch:

The above configuration will take effect after restart】  

sudo reboot