• sales

    +86-0755-88291180

RDK X5 PoE Module For Power Over Ethernet/ IEEE 802.3af/at PoE For D-Robotics RDK X5

$21.37

Brand:SpotPear
SKU:080401300000
Date:2025-01-09 10:32
Part Number:
No:
In Stock

A Power over Ethernet (PoE) expansion board for the RDK X5 motherboard that supports the IEEE 802.3af/at network standard. Suitable for use with a PoE router or switch that supports the IEEE 802.3af/at network standard, you only need to connect a single network cable to allow the RDK motherboard to be connected to the Internet and powered at the same time.

【Overview】

[] RDK X5 Ethernet Power Expansion Board

[] Applicable to D-Robotics RDK X5 motherboard, supports IEEE 802.3af/at network standards

[] Onboard 5V and 12V interfaces to meet the use of more peripherals

【Product Features】

[] A Power over Ethernet (PoE) expansion board for the RDK X5 motherboard that supports the IEEE 802.3af/at network standard. Suitable for use with a PoE router or switch that supports the IEEE 802.3af/at network standard. Just connect a network cable to allow the RDK motherboard to connect to the Internet and be powered at the same time.

[] Based on the 40PIN GPIO interface, suitable for the D-Robotics RDK X5 motherboard

[] Supports PoE Ethernet power supply and IEEE 802.3af/at PoE network standard

[] Adopts a fully isolated switch mode power supply (SMPS)

[] Onboard high-speed active cooling fan and equipped with a metal heat sink to accelerate heat dissipation

【For RDK X5 motherboards】

[] Based on 40PIN GPIO interface design, the pin header is drawn on the top to facilitate access to other expansion boards

【PoE Power over Ethernet】

[] Just connect a network cable to a PoE device to connect the RDK X5 motherboard to the Internet and power it at the same time.

For display only, this product is not compatible with RDK X5 and switches

【Onboard power supply interface】

[] Onboard 5V and 12V pin headers, the 5V interface can output up to 4.5A (the total output power of 12V and 5V does not exceed 25W), which can power the motherboard and other devices at the same time.

【Onboard power supply interface】

[] Accelerate heat dissipation and cooling, making the motherboard run more stably

【Onboard high-power step-down chip】

[] Using the original step-down chip, the output can reach 5A under sufficient heat dissipation conditions

【Installation Instructions】

[] First install the metal heat sink on the motherboard, and then use the included screw package to fix the PoE expansion board.

For display only, please refer to the configuration list for detailed configuration
【Product display】

For display only, please refer to the configuration list for detailed configuration
【Size】