【Note】

[] If you find that the system cannot boot or cannot recognize the hard disk,

[] Check the connection. The FFC cable has a direction. Please check whether the words on the cable are connected correctly;

[] Please update your firmware. Refer to the user manual.

【Product Introduction】

[] X1015 is a PCle M.2 NVMe solid-state drive expansion board designed for Raspberry Pi 5. It supports NVMe protocol M.2 interface hard drives, high-speed reading and writing, fast data transmission and ultra-fast booting, and supports the HailoAI acceleration module built on the Hailo-8l chip of the Raspberry Pi AI Kit.

【Product Details】

【About Hard Drive】

[] Tested to be incompatible with the following drives:

[] WD Blue SN550/SN580 series

[] WD Green SN350 series

[] WD Black SN850 series

[] Other NVMe SSD drives equipped with the same Phison controller

[] These specific models have demonstrated compatibility issues and are recommended to be avoided when considering the X10xx series NVMe expansion boards.

Support NVMe hard disk protocol

Support 2230/2242/2260/2280 NVME M2 SSD disk

【Features】

[] The best storage solution designed for Raspberry Pi 5 - M.2 NVMe SSD Shield; [] Has the same functions as the official Raspberry Pi M.2 HAT;

[] Supports single-channel PCle2.0 interface (peak transfer rate 500mb/s);

[] Supports high-capacity M.2NVMe SSDs up to 4TB;

[] Able to provide up to 3A voltage for connected M.2 devices;

[] Supports installation of official active heat sinks and third-party heat sinks;

[] With ACT LED indicator; on: power normal/standby, flashing: read/write;

[] Provides fast data transfer speed, PCle 2.0 5Gbps / PCle 3.0 8Gbps;

[] Reserved space for installing POE module;

【Metal housing】

[] X1015

[] X1015-With-Case

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com