Interface introduction of each version

[Type A] PCIe extended Gigabit Ethernet port version

[Type B] PCIe expansion 4-way USB3.2 Gen1 version

【Type C】PCIe expansion M.2 version

Large space and strong expandability

There is enough space inside the chassis to connect various expansion modules, such as PoE modules,
and there is still space for wiring, which is good news for people with obsessive-compulsive disorder.

Lead out Pi5 peripheral interface
to support front and rear power supply modes

Each version comes with a Micro HDMI to HDMI adapter board, and supports the Type-C interface, HDMI and terminal blocks, so that the interface is not hidden deep in the chassis, making it convenient for other peripherals to access the HDMI interface, and supports two power supply methods: front and back.

Dual 4K HD output

Each version supports dual HDMI ports and dual 4K video output

Three-dimensional air duct for efficient heat dissipation

Reserve ventilation grid and install fans for better heat dissipation

This product does not contain a fan , if necessary, please purchase it separately

Quick Installation Steps

Prepare the screws shown above

[]  Connect the Raspberry Pi and HDMI converter board and fix them with 7 No. 1 screws and install them on the white aluminum alloy base.

[]  According to the version you purchased, install the remaining expansion board (here we take the Gigabit Ethernet port version as an example) on the white aluminum alloy base plate with two No. 1 screws, and connect the power cord and debug serial port cable as shown in the figure. Set aside for later use.

[] Use all No. 2 screws to fix the two brackets and two No. 3 screws to fix the rear baffle. When the image is completed, place the silicone button in the designated position.

[] Push the board installed in step 2 horizontally into the bottom rail of the housing. Be careful not to let the silicone button fall off.

[] Align the front baffle with the connector and secure it with two No. 3 screws. 

[] Replace the top case and secure with four No. 3 screws to complete the installation.

【Product Size】