【Note】

[] Do not include Raspberry Pi5 and NVME SSD

[] Not Support BOOT From NVME SSD

【Overview】

[] Supports 2230/2242/2280 sizes of solid-state drives (only 2280 copper pillars are welded by default).

[] Only for storage expansion,not for booting from the sSD drive.Only support PCIE 1x Gen2.

[] Enable the NVME SSD by add following command in the config.txt

[] dtparam=nvme

[] Can power the M.2 card directly from the FPC PCle ribbon (port providing at least 1.5A at 5V ofcontinuous power) or through an optional 2-pin pitch bundle for redundant power supply (up to3A at 5V).

[] The board's dimension is 56x86mm, it's slight longer than the Raspberry Pi 5 PCB.

[] Weve made a slot at 40Pin on the board, which doesn't interfere with DuPont wire connections.

【Details】

[] Does not affect the use of Raspberry Pi 5 40pin GPIO

【Assembly direction】

【Outline Dimensions】

[] lmportant Notice: Please be aware that booting from NVMe storage through a PCleswitch is currently not supported. Users planning to utilize NVMe storage should considerthis limitation when designing their projects.

[] MPS2280D x1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com