• sales

    +86-0755-88291180

TFT-LCD User Guide

【Overview】

[] TFT-LCD liquid crystal display is a thin film transistor type liquid crystal display, and it is also a "true color" (TFT).

TFT liquid crystal provides semiconductor switch for each pixel, and each pixel can be directly controlled by point pulse,

so each node is relatively independent and can be continuously controlled,

which not only improves the response speed of the display screen, but also can be accurately controlled. Display color levels,

so that TFT LCD color is more realistic, with good brightness, high contrast, strong layering and bright colors.

【0.96-LCD-80x160】


NumberPin LabelDescription
1GNDLCD Power ground
2VCCLCD power supply is positive (3.3V)
3SCLLCD SPI bus clock signal
4SDALCD SPI bus write data signal
5RESLCD reset control signal(Low level reset)
6DCLCD register / data selection control signal

(Low level: register, high level: data)

7CSLCD selection control signal(Low level enable)
8BLKLCD backlight control signal (high level lighting,

if you do not need control, please connect 3.3V)

Overview

[] 0.96-inch color screen,support 65K color display,display rich colors

[] 80X160 resolution, clear display

[] Large viewing angle(full angle),display color undistorted.

[] Using the 4-line-SPI serial bus, it only takes a few IOs to illuminate the display

[] Provide a rich STM32 and C51 sample program

[] Military-grade process standards, long-term stable work

[] Provide underlying driver technical support


Parameters

[] Display Color:RGB 65K color

[] Screen Size:0.96(inch)

[] Type:IPS

[] Driver IC:ST7735S

[] Resolution:80*160 (Pixel)

[] Module Interface:4-line SPI interface

[] Active Area (AA area):10.80x21.70 (mm)

[] Touch Screen Type:have no touch screen

[] Touch Screen Type :have no touch IC

[] Module PCB Size:30.00x24.04 (mm)

[] Angle of view:all angle

[] Operating Temperature:-10℃~60℃

[] Storage Temperature:-20℃~70℃

[] VCC power voltage:3.3V

[] Power Consumption:TBD

[] Rough Weight(Package containing):8g


Product Documentation

Program Download

Reference Materials

Common Software



  • Interface Function Description
NumberInterfaceFunction Description
8P slot1.25mm spacing slot, module signal input pins
  • Pin Function Description

NumberPin LabelDescription
1GNDVCCLCD Power ground
2VCCLCD power positive(It is recommended to connect to 5V. When connected to 3.3V, the backlight brightness will be slightly dim)
3CLLCD SPI bus clock signal
4SDALCD SPI bus write data signal
5RESLCD reset control signal, Low level reset
6DCLCD command / data selection control signal

High level: data, low level: command

7CSLCD selection control signal, Low level active
8BLKLCD backlight control signal (If you need control, please connect the pins. If you don't need control, you can skip it)

Overview

[] 0.96inch color screen with 240x198 resolution of 65K colors and rich display colors

[] The upgrade adopts IPS full view panel, with good visual angle

[] On board level conversion circuit, compatible with 5V and 3.3V MCU

[] Adopting a 4-wire SPI serial bus to save I/O pins

[] Modules can be selected with or without glass cover plates

[] Unique circular display screen

[] Module input supports slot interfaces with a spacing of 1.25mm

[] Provide rich example learning programs (ESP32/STM32/Arduino UNO&Mage2560/C51/CH32/RaspberryPi)

[] Provide low-level driver technical support, and update WIKI information online

[] Multiple tests for module aging can meet military level standards, supporting long-term stable work


Parameters

[] Screen Size:0 96inch

[] Screen Type:IPS

[] Resolution:240xRGBx198(pixels)

[] Active Area (AA area) :24.408(W)x20.137(H)(mm)

[] Number of Colors(Max):65K

[] Driver IC:ST7789H2

[] Display Interface :4-Line SPI

[] Pixel Size:0.1017(H)x0.1017(V)(mm)

[] View Angle:ALL 0’CLOCK

[] Brightness(TYP) :300(cd/m2)

[] Backlight Type:White LED*2

[] Operation Temperature:-10~60(℃)

[] Storage Temperature :-20~70(℃)

[] TFT Outline Size:27.4±0.2(W)x27.0±0.2(H)x1.31±0.15(D)(mm)(Excluding adhesive backing)

[] Module Outline Size:

NO Glass Cover Plate:29.73(W)x28.14(H)x6.66(D)(mm)(Including positioning columns)

Have Glass Cover Plate:31.88(W)x31.88(H)x9.65(D)(mm)(Including positioning columns)

[] Working Voltage:5.0 V/3.3V

[] Backlight Current:40 mA

[] Power:0.09 W

[] Interface:8P 1.25mm slot interface

[] Weight(including package) :

NO Glass Cover Plate:21g

Have Glass Cover Plate:25g

Product Documentation

Program Download

Reference Materials

Common Software

【0.96-Round-LCD-240x198-C】


  • Interface Function Description
NumberInterfaceFunction Description
8P pin arrangement2.54mm spacing row pins, module signal input pins
  • Pin Function Description

NumberPin LabelDescription
1GNDVCCLCD Power ground
2VCCLCD power positive(It is recommended to connect to 5V. When connected to 3.3V, the backlight brightness will be slightly dim)
3CLLCD SPI bus clock signal
4SDALCD SPI bus write data signal
5RESLCD reset control signal, Low level reset
6DCLCD command / data selection control signal

High level: data, low level: command

7CSLCD selection control signal, Low level active
8BLKLCD backlight control signal (If you need control, please connect the pins. If you don't need control, you can skip it)

Overview

[] 0.96inch color screen with 240x198 resolution of 65K colors and rich display colors

[] The upgrade adopts IPS full view panel, with good visual angle

[] On board level conversion circuit, compatible with 5V and 3.3V MCU

[] Adopting a 4-wire SPI serial bus to save I/O pins

[] Unique circular display screen

[] Module input supports a 2.54mm spacing needle interface

[] Provide rich example learning programs (ESP32/STM32/Arduino UNO&Mage2560/C51/CH32/RaspberryPi)

[] Provide low-level driver technical support, and update WIKI information online

[] Multiple tests for module aging can meet military level standards, supporting long-term stable work


Parameters

[] Screen Size:0 96inch

[] Screen Type:IPS

[] Resolution :240xRGBx198(pixels)

[] Active Area (AA area) :24.408(W)x20.137(H)(mm)

[] Number of Colors(Max):65K

[] Driver IC:ST7789H2

[] Display Interface :4-Line SPI

[] Pixel Size:0.1017(H)x0.1017(V)(mm)

[] View Angle:ALL 0’CLOCK

[] Brightness(TYP):300(cd/m2)

[] Backlight Type:White LED*2

[] Operation Temperature:-10~60(℃)

[] Storage Temperature :-20~70(℃)

[] TFT Outline Size:27.4±0.2(W)x27.0±0.2(H)x1.31±0.15(D)(mm)(Excluding adhesive backing)

[] Module Outline Size:28.4(W)x33.0(H)x11.17(D)(mm)(including Pin Header)

[] Working Voltage :5.0 V/3.3V

[] Backlight Current:40 mA

[] Power:0.09 W

[] Interface:8P 2.54mm pin interface

[] Weight(including package) :13g

Product Documentation

Program Download

Reference Materials

Common Software

【1.3-LCD-240x240】


NumberPin LabelDescription
1GNDLCD Power ground
2VCCLCD power supply is positive (3.3V)
3SCLLCD SPI bus clock signal
4SDALCD SPI bus write data signal
5RESLCD reset control signal(Low level reset)
6DCLCD register / data selection control signal

(Low level: register, high level: data)

7BLKLCD backlight control signal (high level lighting,

if you do not need control, please connect 3.3V)

Overview

[] 1.3-inch color screen,support 65K color display,display rich colors

[] 240X240 resolution, clear display

[] IPS full view panel, super wide visual range

[] Using the 4-line-SPI serial bus, it only takes a few IOs to illuminate the display

[] Provide a rich STM32, C51, MSP430 and RaspberryPi sample program

[] Military-grade process standards, long-term stable work

[] Provide underlying driver technical support


Parameters

[] Display Color:RGB 65K color

[] Screen Size:1.3(inch)

[] Type:IPS

[] Driver IC:ST7789

[] Resolution:240*240 (Pixel)

[] Module Interface:4-line SPI interface

[] Active Area (AA area):23.40x23.40 (mm)

[] Touch Screen Type :have no touch screen

[] Touch Screen Type :have no touch IC

[] Module PCB Size:39.22x27.78 (mm)

[] Angle of view :all angle

[] Operating Temperature:-10℃~60℃

[] Storage Temperature:-20℃~70℃

[] VCC power voltage :3.3V

[] Power Consumption:TBD

[] Rough Weight(Package containing) :9g

Product Documentation

Program Download

Reference Materials

Common Software

【1.44-LCD-128x128】


[]  size: 1.44(inch)

[] display color: RGB 65K color

[] resolution: 128x128

[] display interface: 4-wire SPI

[] driver IC:ST7789V

[] effective display area: 26.2x27.2(mm)

[] overall size: 29.7x43.36 (mm)

[] Rough Weight(Package containing) :12g


Wiki:http://pan.baidu.com/s/1gd49RMV


【1.8-LCD-128x160】


[] Display color: RGB 65K color

[] Size: 1.8(inch)

[] Type: TFT

[] Driver chip: ST7735S

[] Resolution: 128*160 (Pixel)

[] Module interface: 4-wire SPI interface

[] Effective display area (AA area): 28.03x35. Module PCB backplane size: 59.79x42.01(mm)

[] Working temperature: -20℃~60℃

[] VCC power supply voltage: 3.3V~5V

[] Power consumption: to be determined

[] Weight (including packaging): 25(g)


Wiki:https://pan.baidu.com/s/1hnFQgBu2nn8TnmFnThajow 提取码: 5wyq