RP2350 Microcontroller Development Board

Based on the Raspberry Pi's official self-developed RP2350A

Compatible with most Raspberry Pi Pico modules

Product Features

RP2350-LCD-0.96 is a low-cost, high-performance microcontroller development board based on the Raspberry Pi RP2350A design, with flexible digital interfaces. Like the Raspberry Pi Pico 2, the hardware uses the RP2350A microcontroller chip independently developed by Raspberry Pi. For software, you can choose the C/C++ SDK provided by Raspberry Pi, or use MicroPython for development, which can facilitate quick development and embedding into products. Not only that, it also has a 0.96-inch IPS display, a lithium battery charging and discharging interface, and a high-efficiency DC-DC buck-boost chip on board.

The main features are:

• Uses the RP2350A microcontroller chip designed by Raspberry Pi
• Unique dual-core, dual-architecture, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard 3 RISC-V core processor, running at up to 150 MHz
• Built-in 520KB SRAM and 4MB on-chip Flash
• Adopt Type-C interface, keep up with the trend of the times, no need to worry about plugging in the right or wrong direction
• Onboard 0.96-inch 160 × 80 pixel 65K color IPS LCD display
• Onboard lithium battery charging and discharging interface is convenient for using this product in mobile scenarios
• Onboard DC-DC chip MP28164, a high-efficiency DC-DC buck-boost chip with a load current of up to 2A
• Stamp hole design, can be directly welded and integrated into the base plate designed by the user
• USB1.1 host and device support
• Supports low power sleep and hibernation modes
• Drag-and-drop program downloading via USB recognition as mass storage
• Up to 26 multi-function GPIO pins
• 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC, 16 controllable PWM channels
• Precise on-chip clocks and timers
• Temperature Sensor
• On-chip accelerated floating point library
• 12 Programmable I/O (PIO) state machines for custom peripheral support

Version selection

C/C++，MicroPython

Complete SDK and open source tutorials are provided to make it easy to get started and can be quickly embedded into applications

Dual-core processor

Equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard 3 RISC-V processor

Running frequency up to 150 MHz

26 multi-function GPIO pins

Supports configuration pin function, which can be easily and flexibly developed and integrated

Resource Overview

1. USB Type-C port

   Can be used to download programs and supports USB1.1 host and slave devices

2. BOOT button
3. RESET reset button
4. 0.96-inch IPS LCD display

   Resolution 160 × 80, 65K color

5. Battery interface

   MX1.25 connector, can be used to connect 3.7V lithium battery, support charging and discharging at the same time

6. MP28164

   High Efficiency DC-DC Buck-Boost IC

7. ETA6098

   High-efficiency lithium battery charging chip

8. RP2350A

   Dual-core, dual-architecture processor running at up to 150MHz

9. P25Q32SH-UXH-IR

   4MB NOR-Flash

10. Debug interface
11. Pin interface

    Compatible with Raspberry Pi Pico standard interface

Product size

[] RP2350-LCD-0.96（Not Soldered）

[] RP2350-LCD-0.96-M（Soldered）

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com