a Pico-like MCU board based on Raspberry Pi RP2350A

Compatible With Most Of The Raspberry Pi Pico Add-On Modules

Pinheader Options

C/C++, MicroPython Support
Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

Dual-Core, Dual-Architecture

Adopts Dual-Core Arm Cortex-M33 Processor And Dual-Core Hazard 3 RISC-V Processor, Flexible Clock Running Up To 150 MHz

26 × Multi-Function GPIO Pins

Configurable Pin Function, Allows Flexible Development And Integration



What's On Board

1. LED
   user LED (not power indicator)
2. USB Type-C connector
3. ETA6096
   high efficiency Lithium battery recharge manager
4. MP28164
   high efficiency DC-DC buck-boost chip
5. BOOT button
   press it when resetting to enter download mode
6. On-board flash memory
   4MB: W25Q32JVSSIQ
7. RESET button

 

8. RP2350A
   Dual-core and dual-architecture design, up to 150 MHz operating frequency
9. Battery header
   MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
10. Pinout
    compatible with Raspberry Pi Pico 2
11. USB test points
    connecting to USB interface
12. BOOT test point
    connecting to BOOT button
13. DEBUG points

Outline Dimensions

[] RP2350-Plus/16MB（Not Soldered）

[] RP2350-Plus/16MB-M（Soldered）

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com