- sales/support
Google Chat:---
- sales
+86-0755-88291180
- sales01
sales@spotpear.com
- sales02
dragon_manager@163.com
- support
tech-support@spotpear.com
- CEO-Complaints
zhoujie@spotpear.com
- Only Tech-Support
WhatsApp:13246739196
- Purchase/Shipping/Refund
WhatsApp:13424403025
Raspberry Pi Pico 2 RP2350A PoE ETH Ethernet Module W6300
$14.9
RP2350-POE-ETH Development Board: Dual-core, dual-architecture PoE-powered development board with W6300 Ethernet and pico2 support for PoE module integration.
Raspberry Pi Pico 2 RP2350 Recommend
RP2350-POE-ETH Board
RP2350 development, standard Ethernet interface, external module expansion PoE.
Product Features
This product is a high-performance embedded development board independently designed by MicroSnow, equipped with an RP2350A main controller and 16MB NOR Flash. It features an onboard W6300 Ethernet chip, supporting Type-C power supply and also allowing for independent power supply via an external PoE module. It includes a WS2812 programmable indicator light and 20 GPIO pins, all programmable and customizable, offering excellent expandability and suitability for various network IoT projects and embedded product applications.。
- It uses the RP2350A microcontroller chip developed for Raspberry Pi.
- Its unique dual-core, dual-architecture design features a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, with a clock speed of up to 150MHz, allowing users to flexibly switch between the two architectures.
- It has 520KB of built-in SRAM and 16MB of on-chip Flash memory.
- Adopting a Type-C interface, it keeps up with the times and eliminates the need to worry about whether it should be plugged in or out.
- Onboard W6300, integrating TCP/IP protocol stack
- Supports USB 1.1 hosts and devices.
- The stamp perforation design allows for direct soldering and integration onto a user-designed base plate.
- It can be recognized as a mass storage device via USB for drag-and-drop downloading.
- It exposes 20 GPIOs, compatible with some Pico expansion boards.
- It exposes 20 GPIOs, compatible with some Pico expansion boards.
- Built-in temperature sensor can monitor chip temperature in real time.
- 12 programmable I/O (PIO) state machines for custom peripheral support
Version Selection
Note: RP2350-POE-ETH and RP2350-POE-ETH-M are versions without the PoE module.However, all support extended PoE functionality; if you need to use PoE functionality, you need to use a PoE module.
Multiple communication modes
Supports TCP server / TCP client / UDP server / UDP mode
Supports integration with PoE modules
A single network cable is all that's needed to connect the PoE device for both networking and power supply.
Images are for illustrative purposes only; please refer to the configuration list for detailed specifications.
Flexible power supply options
Supports both PoE and USB Type-C power supply.
To use PoE power, you must purchase a package that includes a PoE module.
Dual-core, dual-architecture processor
Onboard dual-core ARM Cortex-M33 + dual-core Hazard3 RISC-V processor, operating at frequencies up to 150MHz.
Supports C/C++, MicroPython, and Arduino.
It comes with a complete SDK and open-source tutorials, making it easy to get started and quickly embeddable into applications.
20 multi-functional GPIO pins
It supports pin configuration, enabling convenient and flexible development and integration.
Resource Introduction
- USB Type-C
It can be used to download programs and supports USB 1.1 host and slave devices.
- WS2812
Cool RGB LED
- BOOT
Press during reset to enter download mode.
- RESET
Reset button
- RP2350A
Dual-core, dual-architecture processor with an operating frequency of up to 150MHz
- PoE module interface and power supply port
- 100Mbps RJ45 network port
- Debug interface
- Low dropout linear regulator
Vout = 3.3V, maximum current 800mA
- 16MB NOR-Flash
- W6300
Ethernet driver chip
Product Dimensions
