• sales


Nano for Arduino Atmega328P With the bootloader Compatible Nano 3.0 controller CH340


Date:2023-07-25 17:02
In Stock

Nano for Arduino Atmega328P Atmega168p With the bootloader Compatible Nano 3.0 controller  CH340 USB driver 16Mhz


[] If you need to solder pin headers, Please contact us.


[] 20 digital input/output ports RX and TX, D2~D13, A0~A5.

[] 8 analog input ports A0 to A7.

[] 1 to the TTL level a serial port to send andreceive port RX/TX.

[] 6 PWM ports, D3, D5, D6, D9, D10, D11.

[] Chip: ATMEGA168P (red board)/ATMEGA328P (blue, black board).

[] Supports serial port download and ISP download.

[] Supports external 3.3V~10V DC power supply.

[] Support the Li-ion polymer batteries whiledirect connect Vcc Pin.

[] 16MHZ clock frequency.


[] Microcontroller: AT mega328

[] USB chip: CH340C

[] Architecture: AVR

[] Operating Voltage: 5V

[] Flash memory: 32 KB, of which 2 KB are used by the boot loader

[] SRAM: 2 KB

[] Clock speed: 16 MHz

[] Analog input pin: 8


[] Input voltage: 7-12V

[] Digital I/O pins: 22 (of which 6 are PWM)

[] PWM output: 6

[] PCB size: 18 x 45 mm

[] Note: lt is a Arduino compatible board, with a CH340C serial toTTL converterreplace the FT232.

Pin diagram