• sales

    +86-0755-88291180

Raspberry Pi Pico-UPS-A User Guide

Overview

The Pico-UPS-A is a dedicated UPS (Uninterruptible Power Supply) module designed for Raspberry Pi Pico. It incorporates a Li-ion battery switching charger with power path management, and a voltage/current monitoring chip, which allows monitoring of the battery operating status via the I2C bus.

Features

  • Standard Raspberry Pi Pico header supports Raspberry Pi Pico series boards
  • Incorporates Li-ion battery switching charger with dynamic power path management, more stable power supply
  • I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real-time
  • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard recharging indicator, power indicator, and battery warning indicator to check if the battery is connected correctly

Specifications

  • Recharge voltage: 5V
  • Control bus: I2C
  • Battery support: 14500 battery (Not included)
  • Dimensions: 60 x 21mm

Pinout


Dimension

TAG: SIM7600G H Mini PCIe SIMCom Original 4G LTE Cat-4 Module Global Coverage GNSS Jetson Orin Nano Super AI Developer Kit Built in Jetson Orin Nano 8GB Memory Core board ESP32 Thermal imaging camera Raspberry Pi Pico 1.14inch LCD Horizontal Drag Instructions TOF Time of Flight Laser Range Sensor Mini Radar module UART Serial / I2C Port For Arduino / Raspberry Pi / ESP32 Pi5 Pure- USB Camera 2MP GC2093 ‌WDR Backlight Compensation‌ Onboard microphone Electronic EYE 0.71 inch Round Double LCD Display Dual Screen For Arduino Raspberry Pi ESP32 Pico STM32 USB camera 5MP IMX335 No Distortion Raspberry Pi Pico 2 RP2350 CAN Onboard XL2515 CAN Controller RP2350A ESP32 S3 Development Board 2.8 inch Round LCD Display 480x480 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino LuckFox Pico pro PI5 Jetson Orin NX Industrial Modbus POE ETH RJ45 To Relay 30CH RTU/Modbus TCP-Ethernet For IOT RS485 to RJ45 Raspberry Pi 7.5 inch e-Paper link (H) RYBW 800x480 For Arduino / Jetson Nano / STM32 RP2040 BPI