• sales

    +86-0755-88291180

RP2040-LCD-0.99-B User Guide

【Overview】

[] RP2040 Microcontroller LCD Development Board: Designed based on Raspberry Pi's RP2040 with a CNC metal enclosure.


【Features】

RP2040-LCD-0.99-B is a high-performance and cost-effective microcontroller product designed by Waveshare, featuring a 0.99-inch circular LCD screen (with a non-arc-shaped bottom edge in the display area) and peripherals like a six-axis sensor (three-axis accelerometer and three-axis gyroscope). It integrates a Raspberry Pi-designed RP2040 microcontroller chip and exposes 4 GPIO pins through the SH1.0 6PIN connector, making it convenient for development and embedding into applications.


Key Features:

[] Uses the RP2040 microcontroller chip designed by Raspberry Pi

[] Equipped with dual-core ARM Cortex M0+ processor, running at a flexible clock frequency of up to 133MHz

[] Built-in 264KB SRAM and 2MB on-chip Flash

[] USB Type-C interface for modern connectivity, with reversible insertion

[] Onboard 0.99-inch 125x115 resolution, 65K color IPS LCD display (non-arc-shaped bottom edge in the display area) for clear color image display

[] Exposes 4 GPIO pins through the SH1.0 6PIN connector

[] CNC metal upper shell and acrylic matte bottom plate on the back

[] USB 1.1 host and device support

[] Supports low-power sleep and deep sleep modes

[] Recognizable as a high-capacity storage device for drag-and-drop program downloads via USB

[] 2 I2C, 4 12-bit ADC

[] Precise on-chip clock and timer

[] Temperature sensor

[] On-chip accelerated floating-point library

[] 8 programmable I/O (PIO) state machines for custom peripheral support

[] Supports C/C++, MicroPython, Arduino, with comprehensive SDK, open-source materials, and tutorials for easy integration into applications.


【Resource Introduction】


1. USB Type-C Interface

Used for program downloads and supports USB 1.1 host and device functions.


2. RT9013-33GB

500mA low dropout, low noise, ultra-fast LDO.


3. QMI8658C

Six-axis Inertial Measurement Unit (IMU) with a 3-axis gyroscope and a 3-axis accelerometer.


4. W25Q16JVUXIQ

2MB NOR-Flash.


5. RP2040

Dual-core processor with a maximum operating frequency of 133MHz.


6. SH1.0 6PIN Connector

Exposes 4 GPIO pins, arranged from top to bottom as: GND, 3V3, GP26~GP29.


7. BOOT Button

Press the BOOT button while powering on to enter download mode.


【Dimensions】

TAG: PC U Computer Raspberry Pi 5 Camera User Guide WIFI Configuration Bus Servo Adapter A Aluminum Heatsink Industrial Isolated RS485 TO ETH (C) RJ45 Converter Wall/Rail-Mount For Modbus Raspberry Pi Pico 2 RP2350 2.8 inch LCD Capacitive TouchScreen Development Board 240x320 Display QMI8658 6-Axis /PCM5101 Audio /SD /RTC /Battery Port WiFi6 Development Board Computer USB Monitor Screen Raspberry Pi 5 PCIe to M.2 Mini NVMe SSD Board (E) With Customized Active Cooler Together Raspberry Pi 5 Official Original AI Kit Hailo8l 13Tops/26Tops PCIe M.2 HAT+ Board For Pi5 Raspberry Pi 5 TTL WiFi Wireless ESP32 DDSM Motor Driver HAT For Direct Drive Servo Hub Motors For Raspberry Pi SP485EN 8.8inch LCD 1920x480 Computer PC Monitor Display Secondary Screen TypeC USB CPU RAM Raspberry Pi Pico RP2040 1.5inch LCD Arduino Thermal imaging Industrial Modbus RTU RS485 4-ch Relay With isolation protection and guide rail