5inch DPI LCD User Guide

Introduction

800x480, 5inch IPS Display for Raspberry Pi, DPI interface, no Touch

Features

  • 800x480 high resolution
  • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
  • The TFT LCD is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz
  • Supports Raspbian, Ubuntu, OSMC, etc.
  • Back light control to lower power consumption
  • Compact size, suit for various projects

【Note】This LCD can only used for displaying, if you require touchscreen, please purchase 5inch HDMI LCD (H) (capacitive) or 5inch HDMI LCD (G) (resistive)


How to use

Hardware connection

  • 1. Connect the RGB LCD HAT to the JP1 socket on RGB 50P TO 40/50P adapter with an FFC cable (white).
  • 2. Connect the FPC cable (golden) on LCD to the JP3 socket on RGB 50P TO 40/50P adapter.
Note: please first unlock the ZIF connector then gently remove/insert the cable. As shown below

Software settings

  • 1. Write the Raspbian, Ubuntu Mate, or OSMC system image to your micro SD card. You can download the images from Raspberry Pi web site https://www.raspberrypi.org/downloads/
  • 2. Edit the /boot/config.txt file in the SD card and append the following lines:
For Raspberry Pi 2B/3B/3B+/Zero/Zero W
dtoverlay=dpi24
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
dpi_output_format=0x6f005
hdmi_timings=800 0 40 48 88 480 0 13 3 32 0 0 0 60 0 32000000 6
For Raspberry Pi 4B, you need to add lines between [pi4] and [all], then remove/comment line dtoverlay=vc4-fkms-V3D as below
[pi4]
# Enable DRM VC4 V3D driver on top of the dispmanx display stack
#dtoverlay=vc4-fkms-v3d
max_framebuffers=2
dpi_timings=800 0 40 48 88 480 0 13 3 32 0 0 0 60 0 26000000 6
 
[all]
#dtoverlay=vc4-fkms-v3d
dtoverlay=dpi24
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
dpi_output_format=0x6f005
hdmi_timings=800 0 40 48 88 480 0 13 3 32 0 0 0 60 0 32000000 6
disable_overscan=1
Note:
  • You must make sure that there are no spaces on either side of the equal sign.
  • If your system is installed from NOOBS, you have to connect your Pi to another monitor and hold down the shift key while system booting to edit the config file.
  • 3. Save the file and insert the SD card into your Pi.
  • 4. Turn on the backlight switch.
  • 5. Power up and the LCD will display in most cases.

Price: $31.89
Part Number: 5inch DPI LCD
Brand: Spotpear
SKU: 0105211