- This is a raspberry pi HDMI to CSI-2 Module with Toshiba TC358743XBG chip, HDMI input supports up to 1080p25fps.
- 1 x Raspberry Pi HDMI to CSI-2 Module
- 1 x FFC Cable(14cm/5.51inch length)
- Input signal: HDMI;
- Output signal: CSI;
- HDMI Input: 720p50\720p60\1080i50\1080p25
- Function: HDMI to CSI-2
- Limitation: HDMI input supports up to 1080p25fps
- Usage: Same as standard Raspberry Pi camera
- Chip: Toshiba TC358743XBG
- Compatible with: Raspberry Pi 4B/3B+/3B/2B/B+/3A+/Pi Zero/Zero W
step1. Check this module if be driven?
After connecting all the cables, power on the Raspberry Pi, the C779 indicator light is normally green, and after opening the Raspberry Pi terminal, enter the following command:
then check if video0 appears. If it appears correctly, it means that the module has been successfully driven and is working normally.
Please try the following oreration if you can't find 'video0'
step2. update & upgrade the raspberry pi system (It may be necessary to update the software source according to your country, and this will take a long time)
sudo apt-get update
sudo apt-get upgrade
step3. Open camera module via raspi-config command;
Enable camera & reboot the raspberry pi.
step4: goto step1
step5: if you still can't find 'video0' file in the /dev path, please try the following methods:
A: Confirm whether the HDMI input device has a signal, (you can test whether it is displayed normally by connecting to the screen)
B. Confirm whether the resolution and frame rate of the HDMI input device are below the maximum input resolution and frame rate(720p50\720p60\1080i50\1080p25);
C: We recommend that you download the lastest official image of Raspberry pi if you still don't solve your questions. Download URL: https://www.raspberrypi.org/downloads/raspberry-pi-os/