• sales

    +86-0755-88291180

DC5-36-TO-DC3V3-5 User Guide

Overview

Product overview

DC5-36-TO-DC3V3-5 is a compact DC-DC buck regulator module with a wide voltage input range, capable of switching between 3.3V and 5V output voltages

Features


  • Supports a wide voltage input of 5~36V, with the ability to set the output to 5V or 3.3V, and the output current can reach 4A
    • The factory default is 5V output, and the input voltage range is: 6~36V
    • Can be set to 3.3V output by soldering, and the input voltage range is: 5~36V
  • 3.3V or 5V buck-regulated regulated output, which can be selected by welding the switching resistor
  • Adopts black immersion gold process, small in size and easy to integrate and embed


Version Options


      SMD version         With header and terminal


Specifications

Mode5V mode
(factory default)
3.3V mode
(0R resistor must be soldered to 3.3V side)
Input voltageDC 6~36VDC 5~36V
Output voltageDC 5VDC 3.3V
Output current0A~4A (up to 5Ain the extreme case, heat dissipation required)
Switching frequency500KHz
Conversion efficiency90%
Dimensions33*16*5.7mm
  • Note: When the current exceeds 3A, it is recommended to add heat dissipation

Interfaces


Left interfaceRight interface
VIN+Power input positive
VOUT(+)Power output positive
VIN-Power input negativeGND(-)Power output negative


Basic function


Using the DC5-36-TO-DC3V3-5 as a buck regulator module, it is connected in series between the power supply and the device, and can also be embedded in other products, thus realizing the reduction of input voltages ranging from 5V to 36V to 3.3V or 5V output voltages. The output voltage can be changed by soldering a switchable resistor

Dimensions



Resources

FAQ

Question:How do I switch the output voltage of this product?

 Answer:

You can switch the 0R resistor in the red box below with a soldering iron (3.3V on the left, 5V on the right)




Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Email: services01@spotpear.com



TAG: Sensor UGV Beast PT Kit AI OpenCV Robot Car MediaPipe For Jetson Orin JETSON NANO MINI X1012 Raspberry Pi 5 POE And PCIe to M.2 NVMe SSD Board Pi5 2280 Power over Ethernet Jetson Orin Case 8inch LCD 1280x800 Computer PC Monitor Display Secondary Screen TypeC USB CPU RAM Raspberry Pi 5 POE + PCIe to M.2 NVMe SSD Board HAT+ Pi5 2242/2230 Power over Ethernet ESP32 P4 Development Board WIFI6 4 inch LCD Round Display 4inch TouchScreen 720×720 Dual Microphones Raspberry Pi 5 8 inch DSI LCD Captive TouchScreen MIPI Display 1280x800 Industrial One-Body Tablet PC With 5MP Front Camera Raspberry Pi 5 Box Case Ki-A PCIe to RJ45 Gigabit Ethernet All Ports To Pi's USB Side Sipeed Lichee Tang Nano 4K FPGA MINI Development Board W1NSR-LV4C GOAI Gowin PC Secondary Screen Gripper Serial Robotic Arm Gripper Mechanical claw Serial Bus Servo ST3215/CF35-12 pcb800099-v.9 Raspberry Pi 5 Gen3 Raspberry Pi 5 PCIe to 4-CH M.2 NVMe 4-Ports SSD Board HAT Pi5 Four-Times ESP32 S3 Development Board 1.47 inch LCD Touch Screen 1.47inch Display 172×320 SD AXS5106L JD9853 RV1106 Raspberry Pi 10.85 inch e-Paper ink screen display black white 1360×480 For Arduino /Jetson /STM32 /ESP32 Raspberry Pi Monitor Official Original DisplayScreen 15.6 inch LCD Full HD 1920x1080 15.6inch