Cubieboard2 User Guide

   Overview

• 1. Large selection space: A20 core board, users can choose to configure wireless WIFI and camera.
• Select functional modules according to the nature and needs of your own products to effectively control costs.
• 2. Rich interfaces, including USB, HDMI, SD card, SATA, infrared and other interfaces.
• 3. A wide range of applications: connected to a monitor and a mouse, it becomes a computer, and the office and entertainment can be carried out at the same time.
• Learning as a development board, as a monitoring device, etc.
• 4. Good stability: This product is designed for the purpose of stability. Sudden power failure, unplugging and plugging in the power supply will not affect the performance of the board.
• 5. The software is 100% open source.
• 6. The schematic diagram is open source.

   Specifications

• Processor: ARM cortex A7 dual core
• Graphics card: Mail 400, MP2 GPU Opengl2.0
• Memory: 1GB DDR3 8G emmc
• Video output: HDMI1080P HD output
• Network: 10/100M Ethernet interface
• Main interface: USB2.0*2 TF card slots*1 SATA interface*1 infrared*1
• Other interfaces: 96 expansion pins support I2C/SPI/LCD and various sensors
• Power supply: 5V2A DC power supply
• Operating system: run Android/Ununtu, or other versions of linux, and the system is pre-installed with Android or Ubuntu
• Hard decoding resolution: 2106P (4K ultra-clear
• Storage support: Built-in 8G emmc flash memory, maximum support for 64GB expansion USB card, maximum support for 2TB hard disk with 2.5SATA interface
• Basic configuration
• CPU operating frequency: Cortex-A7 dual-core architecture, 1GHz
• CPU model: Allwinner A20
• GPU: Mali-400 MP2 multi-core GPU (graphics card)
• 1GB DDR3 memory 8G EMMC flash memory
• 4GB high-speed flash memory (hard disk)
• Multimedia capabilities
• HD H.264 2160P video decoding (decoding)
• Full HD video decoding
• BD Directory, BD ISO and BD m2ts video decoding
• H.264 High Profile 1080P@30fps encoding (encoding)
• 3840×1080@30fps 3D decoding
• Complies with RTSP, HTTP, HLS, RTMP, MMS streaming media protocol
• Display output
• HDMI1.4 output resolution: 1080P (1920×1080)
• Support HDMI to VGA
• Support MPEG-4/H.263/H.264/VC1/Xvid and other video encoding formats up to 1080P@30 frames per second
• LCD interface: support RGB88 mode, support resistive/capacitive touch, support LVDS (requires external module)
• Standard interface
• Audio output: 3.5mm audio socket
• Audio input: line in 
• HDMI: Standard HDMI prefix=st1 1.4a
• USB 2.0 Host: 2 USB Type A ports
• MiniUSB 2.0 interface (otg) compatible with 1.1
• SD card holder:  TF card
• Ethernet: RJ45 interface, support 100/10M adaptive
• Power interface 1:  specification: 4.0/1.7mm
• SATA interface:  can be connected to SSD solid state drive or ordinary hard drive
• Pin socket
• U14: 48pin 2.0mm pitch double-row needle, including LCD×1, LVDS×2, PWM, TP, UART×2, SPI×1, I2S×1, GPIO×37, EINT×4, GND 3.3V and other signals
• U15: 48pin 2.0mm spacing single header, including I2C, SPI, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP
• UART serial port: 1 way, 2.0mm pitch header (UART0)
• SATA5V: dedicated to power SATA hard drives (can be controlled in software)
• Motherboard Size/Process
• PCB size: 100×60mm
• Immersion Gold Craft
• Additional resources
• Keys: 2 Reset, FEL (upgrade key)
• User Programmable LEDs: 2
• IR infrared receiving head: 1
• Function extension
• 3G Internet access (external 3G Internet card)
• WiFi (external module)
• Bluetooth (external module)
• RTC real time clock
• SATA hard disk: the maximum can be connected to 2T (2.5 inches)

CubieBoards: http://cubieboard.org/download/

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com