【User Guide】Raspberry Pi 5 RTC Battery Box

】Raspberry Pi 5 Installation RTC Battery and RTC Battery Charging Tutorial:

Step 1: Install the battery in the battery box. The battery model can be CR2032 without charging function or LIR2032 with charging function，Pay attention to the installation direction of the battery. Reverse installation may damage the raspberry pi

Step 2: Working With Raspberry Pi 5

Step 3: Power up Raspberry Pi5

Step 4: Enter the Raspberry Pi system terminal. Add the RTC battery charging configuration for Raspberry Pi 5 in config.txt, which is only required for the LIR2032 battery version with charging function. Batteries without charging function cannot be equipped with this configuration. Otherwise, it will damage the battery

Step 5: To prove that the RTC battery is working. Turn off the Raspberry Pi5 and unplug the power. In a few minutes. Turn on the system again. Observe if the Raspberry Pi system time is updated.

If the RTC battery is not powered. The Raspberry Pi system time will remain unchanged during power outages

If the RTC battery is successfully powered. The system time will be updated

【Video tutorial】

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： NanoKVM-USB Quick Start Jetson-nano-to-boot-the-system User Guide Tuya AI Voice Robot T5-E1 1.75 inch Round AMOLED TouchScreen GPS For XiaoZhi Development Board Raspberry Pi 7 inch DSI MIPI LCD TouchScreen Display 7inch 720x1280 For Luckfox Lyra RK3506/ESP32-P4/Luckfox Omni3576 Raspberry Pi Pico 2 RP2350 0.85 inch LCD Display mini Development Board 0.85inch Screen RGB LED/SD Slot /QMI8658 Gyroscope Sensor LuckFox Pico plus Jetson Nano Case ESP32-S3 Smart 86 Box Development Board with 4 inch 480x480 Display Touch Screen For AI and DeepSeek 1.5inch LCD Screen VGA to RGB Jetson Nano Heatsink WiFi6 Tang Nano FPGA Demo Code LCD1602 I2C Module PWM Adjustable backlight 3.3V/5V For Arduino/ Raspberry Pi/ Pico/ Jetson Nano/ ESP32 Arduino 0.85inch LCD Raspberry Pi WatchDog Raspberry Pi 5 PCIe to 4-CH M.2 NVMe 4-Ports SSD Board HAT Pi5 Four-Times X1009 Raspberry Pi 5 PCIe To 5-Port SATA SATA3.0 (NOT BOOT From SATA) Spotpear

【User Guide】Raspberry Pi 5 RTC Battery Box

To：

Email(support)

Raspberry Pi 5 RTC Battery Box (Not include CR2032 or LIR2032 Battery)