Raspberry Pi 5 PI5 UART Serial Debug Terminal Module with USB Type-A Interface

Raspberry Pi 5 PI5 UART Serial Debug Terminal Module with USB Type-A Interface

$2.89

Brand：Spotpear

SKU：0102178

Date：2024-01-25 13:21

Part Number：

Pi-UART-Debugger

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

UART PI5 Serial Debug Module: Specifically designed for Raspberry Pi 5. Stable transmission, suitable for multiple devices, and compatible with multiple systems.

【Overview】

[] UART PI5 Serial Debug Module: Specifically designed for Raspberry Pi 5. Stable transmission, suitable for multiple devices, and compatible with multiple systems.

【Features】

[] Supports Mac, Linux, Android, Windows 7/8/8.1/10/11

[] Onboard resettable fuse and transient suppression diode for overcurrent and overvoltage protection, surge protection, electrostatic discharge (ESD) protection, improving shock resistance, ensuring stable and safe communication

[] Onboard IO protection circuit for surge and ESD protection, ensuring stable and safe communication

[] Onboard TTL serial port with 3.3V and 5V level conversion pins, switchable TTL communication level

[] Supports output of 3.3V/5V (module powered by USB, jumper cap needs to be set to 3.3V/5V)

[] Utilizes double-sided black gold immersion technology, durable and aesthetically pleasing

【PI5 Serial Debug】

[] Suitable for Raspberry Pi 5, supports various wiring methods

Connect to the PI5 Debug interface via SH1.0 3PIN cable

Connect to the PI5 40PIN UART via a 6PIN to custom cable

Connect to the PI5 Debug interface via SH1.0 to 3PIN custom cable

【Multiple Protection Circuits, Safe and Stable】

[] Onboard resettable fuse and transient suppression diode for overcurrent and overvoltage protection, improving shock resistance

[] Onboard IO protection circuit for surge and ESD protection, ensuring stable and safe communication

【Interface Introduction】

Indicator light introduction:

[] PWR: Power indicator light, lights up when voltage is detected from the USB

[] RXD: Receive indicator light, lights up when data is received from the device interface

[] TXD: Transmit indicator light, lights up when data is sent from the USB port

【Pin Descriptions】

[] VCC: Provides 5V or 3.3V voltage to external devices (set via jumper cap)

[] GND: Connect to GND

[] TXD: Connect to MCU.RXD

[] RXD: Connect to MCU.TXD

[] RTS#: Connect to MCU.CTS

[] CTS#: Connect to MCU.RTS

【Dimensions】

[] Pi-UART-Debugger

1. Pi-UART-Debugger × 1

2. Dupont wire with 6PIN to custom connector × 1

3. SH1.0 to 3PIN custom cable, approximately 100mm × 1

4. SH1.0 3PIN cable, approximately 100mm, opposite direction × 1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!