【Deepseek Xiaozhi AI Guide】

】Power

[] Some devices：Turn on by just connected USB Power

[] Some devices：Turn on (Press power Button for 1 sec). Turn off (Press power Button for 5 secs (keep screen black). Power button location：

ESP32-S3-AI-Kit-(C)-0.96OLED

ESP32-S3-AI-Kit-(C)-1.54LCD

[] Some devices：Toggling a switch to turn On/Off the power

ESP32-S3-AI-3.13inch-LCD

Xmini-C3/Xmini-C3-Kit-Box

[] Breadboard DIY Kit ESP32-S3-AI-DIY-Kit-(A) Hardware Connection reference：Breadboard DIY Hardware Connection

(Ignore if you are not a customer of this product)

】Connect to WIFI

[] After powering on, connect your phone to WIFI: Xiaozhi-xxxx

After the connection is successful, wait for a while and the network configuration page will pop up, automatically searching for hotspots in the current environment

Select your LAN WIFI or mobile hotspot and enter the password (or manually enter the account password above) to complete the network configuration (Note: The mobile hotspot WIFI frequency band must be 2.4GHz, turn off the 5G 6G compatibility of the mobile hotspot)

After the network configuration is completed, the screen will obtain the device code.

For devices without a screen: The device code will be announced by voice. Remember the device code announced by voice as it will be used for activation later.

】Enter the settings backend

[] Click console/【控制台】

】Register an account

Telephone area codes for some countries :  

+86 Mainland China、+852 Hong Kong China、+853 Macau China、+886 Taiwan China、+1 United States/Canada、+44 United Kingdom、+33 France、+39 Italy、+49 Germany、+48 Poland、+41 Switzerland、+34 Spain、+60 Malaysia、+61 Australia、+62 Indonesia、+63 Philippines、+64 New Zealand、+65 Singapore、+66 Thailand、+81 Japan、+82 South Korea、+84 Vietnam、+91   India、+92 Pakistan、+234 Nigeria、+880 Bangladesh、+966 Saudi Arabia、+971 United Arab Emirates、+55 Brazil、+52 Mexico、+56 Chile、+54 Argentina、+20 Egypt、+27 South Africa、+254 Kenya、+255 Tanzania

You can Google the area codes of other countries. If you can't find the corresponding area code, it means it is not supported yet.

】Modify language

】Click add device/【添加设备】

Enter the device code on the screen

[] Restart the device.

wait for connection, after successful connection, as shown in the figure

At this time, you need to press the Boot button to manually wake up and start the conversation. Voice wake-up requires Voice wake setting (the C3 series does not support voice wake-up)

】Boot button location reference

ESP32-S3-1.28-AI (V1)

ESP32-S3-AI-Kit-(A)

ESP32-S3-AI-Kit-(B)

ESP32-S3-AI-Kit-(C)

EPS32-S3-AI-3.13inch-LCD

ESP32-S3-Touch-AMOLED-1.8

Xmini-C3/Xmini-C3-Kit-Box

The following devices can be awakened by clicking the touch screen

EPS32-S3-1.8inch-Touch-LCD

The following devices can be awakened by call "Hi, ESP" 

ESP32-S3-Touch-LCD-1.46

ESP32-S3-Touch-LCD-1.85/ESP32-S3-LCD-1.85

Note: Only one mobile phone number can be bound to the activated device. If you need to support other mobile phone numbers, unbind them first -> Untie the device

】Voice wake setting

(The next time you use AI, you can wake up AI by saying Hi ESP instead of pressing BOOT)

Note: Voiceprint recognition requires first using AI to speak a single 2-second monologue. After that, the background will wait 1-3 minutes before updating the conversation information.

】Set English answer and DeepSeek

[] Click【Configure roles】->【英文老师】->【Language model 】Choose Deepseek V3->【Save】

[] Restart the device 

Restart the device and it will be ready for use later

Press the BOOT button. Say “HI，ESP”， You can start the conversation now

】Untie the device

【Source Code compilation】

Note: Beginners skip. For developers compiling tutorial

】Compilation environment installation：

ESP-IDF download and installation

】Compile

[] Download Source Code

Xmini-C3-AI

ESP32-S3-AI-Kit-(A)

ESP32-S3-AI-Kit-(B)

ESP32-S3-1.54-AI

ESP32-S3-1.28-AI

ESP32-S3-1.8inch-AI

ESP32-S3-Touch-LCD-1.46-AI

ESP32-S3-Touch-AMOLED-1.8-AI

ESP32-S3-Touch-LCD-1.85-AI

Download xiaozhi-esp32-main, Go to the terminal and open IDF5.3 or double-click ESP IDF5.3 Powershell on the desktop

The directory I extracted is different from yours, so enter the directory you just extracted:

cd F:\project\esp32\ESP32AI\AW1\xiaozhi-esp32-main\xiaozhi-esp32-main

[] Set chip type

Enter the following command again to set the chip to S3

idf.py set-target esp32s3

[] Change the compiler board subtype

By default, the compiled firmware is for the breadboard. If you need to replace the breadboard, you need to enter the firmware

idf.py menuconfig

The board types selected for different product compilations are as follows：

ESP32-S3-AI-DIY-Kit-(A)      ESP32-S3-AI-Kit-(B)

ESP32-S3-AI-Kit-(C)-0.96OLED   ESP32-S3-AI-Kit-(C)-1.54LCD

ESP32-S3-1.28-AI (V1)         ESP32-S3-Touch-LCD-1.46

ESP32-S3-Touch-AMOLED-1.8    ESP32-S3-1.8inch-AI

ESP32-S3-LCD-1.85 / ESP32-S3-Touch-LCD-1.85

ESP32-S3-AI-3.13inch-LCD       Xmini-C3/Xmini-C3-kit-box

[] Change the wake word

(can be changed on demand)

[] Start compiling

Enter idf.py build again to compile

[] Start burning

Input idf.py build flash monitor

Press Enter button to burn