Raspberry Pi Compute Module 5 PoE BASE A RJ45 For CM5 Lite/eMMC

Raspberry Pi Compute Module 5 PoE BASE A RJ45 For CM5 Lite/eMMC

$39.9

Brand：SpotPear

SKU：

Date：2024-11-29 16:22

Part Number：

CM5-PoE-BASE-A

No：

- +

Pre-sale

Buy It Now

Add to cart

Ask a Question

Copy Link

Raspberry Pi CM5 PoE expansion board

Easy to learn and evaluate the Raspberry Pi computing module or directly integrate into the product

Baseboard for Compute Module 5 Lite/eMMC

Raspberry Pi Compute Module 5 CM5 Recommend

Compute Module 5

Compute Module 5 IO Board

CM5-PoE-BASE-A

CM5-FAN-3007-5V

RPi CM5 PoE Expansion Board

Convenient for learning and evaluating the Raspberry Pi Compute Module or integrating directly into products

Compute Module 5 Lite/eMMC compatible baseboard

Product Parameters

Scope of application	Applies to all versions of Compute Module 5
Networking	Gigabit Ethernet RJ45 interface, integrated 802.3af/at network standard PoE circuit (5V/5A)
Connectors	Raspberry Pi 40-pin GPIO interface
USB	USB 3.2 Gen1 port × 2
USB	USB 2.0 port × 2
MIPI	4-lane MIPI interface × 2 (22pin 0.5mm FPC connector)
Video	HDMI port × 2, supports 4K output
Real time clock battery	CR/ML2032 battery powered
Storage	Onboard Micro SD card slot (for versions without eMMC)
Fan connector	5V, four-pin JST-SH PWM fan connector
NVMe	PCIe Gen2/3 x1
Power Input	5V 5A
Size	160.0 × 90 (mm)

Connecting to the Compute Module 5 motherboard

Onboard 40-pin GPIO interface and standard CM5 connector

Supports access to Compute Module 5 Lite/eMMC series motherboards

Support for M.2 NVMe drives

Compared with the Micro SD interface of Raspberry Pi, it has faster reading and writing speed,

greatly improves the reading and writing speed of the system or files, and supports NVMe SSD to boot Raspberry Pi

* for reference only, please refer to the Package Content for detailed part list

Applicable M.2 hard drive size

Applicable hard disk interface

Note: Only supports the NVMe Protocol Solid State Drives.

More rich interfaces

Equipped with MIPI / M.2 / HDMI / USB / ETH / Micro SD card and other interfaces

More convenient to use

Resource Overview

CM5 Connectors
Applies to all versions of Compute Module 5
Power supply interface
Power supply DC 5V 5A, supports burning
M.2 LED
NVMe hard drive flashes when reading or writing
M.2 M key
Supports 2280/2260/2242/2230 NVMe hard drives or AI modules
Dual MIPI interfaces
Supports access to DSI displays or CSI cameras
PSW button
Power button
40-pin GPIO interface
Supports access to various HATs
RTC battery connector
You can use CR/ML2032 to power the RTC
HDMI interface
Dual HDMI interface, supports dual 4K output
Dual LED lamp holder
Red light: Raspberry Pi power indicator
Green light: Raspberry Pi working status indicator
USB 2.0
Dual USB 2.0 ports support various USB devices
USB 3.2 Gen1
Dual-lane USB 3.2 Gen1 high-speed interface, supporting 5Gbps simultaneous operation
Gigabit Ethernet
Gigabit Ethernet port with PoE power supply
FAN
Easy access to cooling fans
Other function pins
Support extended functions
IO-VREF/PoE Selection
CM5 IO logic voltage switch 3.3V or 1.8V
PoE Enable (EN) or Disable (DIS)
CAM1 and DISP1 drive the I2C interface
Connect when CAM1 / DISP1 is required
Micro SD card port (back)
Used to access the Micro SD card with the system, only applicable to the version without eMMC

Dimensions

[] CM5-PoE-BASE-A

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!