Write Image for Compute Module Boards Lite version

If your CM4 board is the Lite version without eMMC and you need to use a Micro SD card, we recommend you write images with an SD card reader.

Download the newest Raspberry Pi image from Raspberry Pi Website.
Connect your Micro SD card to the host PC with the card reader.
Format the Micro SD card (the portable disk) by SDFormatter.exe software.
Write the Raspberry Pi image to the Sd card by Win32DiskImager.exe software, choose the image file, and click "Write" to start. It may prompt you to format the CM4 again after writing, just ignore it.
After writing, a disk named BOOT is recognized, go into the disk and modify the config.txt file. Add the line to the file: dtoverlay=dwc2,dr_mode=host.
To finish, eject the BOOT disk from the host PC. Disconnect the USB cable and power adapter, disconnect the BOOT, and set the switch to OFF. restart the board and go ahead with the examples.
If you do not have a card reader, you can insert the SD card into the carrier board and write it just like the eMMC version.
- Write Image for Compute Module Boards eMMC version

TAG： Raspberry Pi CM5 Compute Module 5 Development Kit With CM5104032 + Official Original IO Board + Case Raspberry Pi 5 DSI 101M-8001280-IPS-CT-K User Guide X1301 Raspberry Pi 5 HDMI to CSI-2 Shield 1080P@60fps & Audio & Video Also For 4B/3B Core3566002032 Raspberry Pi 15.6 inch QLED Quantum Dot Display 1920x1080 Capacitive Touchscreen For Computer PC/Jetson/Game $167.99 DDSM115 Direct Drive Servo Motor All-In-One Design Hub RS485 Motor RP2040 ESP32-S3 Development Board 3.16 inch LCD display 3.16inch Screen SD slot 320x820 RGB LED ST7701 User Guide ESP32-S3 1.28inch Raspberry Pi Display SpotPear Raspberry Pi 5 USB Audio Pi5 Raspberry Pi Secondary Screen Raspberry Pi 5 IMX219 Raspberry Pi 5 PCIe to M.2 Serial UART Bus Servo ST3215-HS 20KG.CM High Speed Magnetic Encoder 360° Large Torque Raspberry Pi 4B