• sales

    +86-0755-88291180

Raspberry Pi 1.54inch LCD-Retropie-Joystick configuration tutorial

cd RetroPie-Setup/

sudo ./retropie_setup.sh









Because the driver need internet, You may install the driver unsuccessfully,
You need try again or your internet have some problems which make your pi can not connect to github

sudo nano /etc/modprobe.d/mk_arcade_joystick_rpi.conf
After you have installed the driver well. Add the following joystick configuration to this file
#options mk_arcade_joystick_rpi map=1
options mk_arcade_joystick_rpi map=5 gpio=5,6,16,13,26,19,21,20,15,12,14,23


After rebooting to remap your key , then Gamepad works

TAG: Luckfox Pico Tutorial PCIe M.2 NVMe Dual SSD English Character Display Principle Jetson Orin Nano/NX Super Developer IO Base Development Board Dual network RJ45 For Jetson Orin Nano/NX Module ESP32 MLX90640 ESP32-S3 AI Dancing Robot Development Board Chatbot AI Toy Desktop Dance Pet Electronic EYE 0.71 inch Round Double LCD Display Dual Screen For Arduino Raspberry Pi ESP32 Pico ST CAN FD Raspberry Pi 5 AI kit Hailo8 26Tops PCIe to M.2 NVMe HAT Plus For Pi5 Arduino MLX90641 EyeLink-RC-S1 Industrial Edition 5.5 inch Touchscreen Camera R1M Card Recording Flight Controller FPV Drone ground station image transmission remote STM32 1.54inch OLED DDSM115 Direct Drive Servo Motor All-In-One Design Hub RS485 Motor ESP32-S3 AI RGB Matrix Driver Board Dual Microphone DeepSeek NanoKVM-Lite-Quick-Start ADXL354C Evaluation Board Raspberry Pi LCD Capacitive TouchScreen Display HDMI 6.25inch 720x1560 SpotPear USB Camera 5MP OS05A20 USB 2.0 onboard single mike 175° wide angle Jetson Nano