• sales

    +86-0755-88291180

RPi-USB-Audio-Moudle-A Guide

[Step 1]

Install a case and install the module on your Raspberry Pi (if you bought a case)


[Step 2]

The sound card is driver-free. No additional driver needs to be installed. After entering the operating system, you need to select USB audio output


[Possible problems]

[] The USB sound card will occupy the USB port of the Raspberry Pi at the position shown below. Avoid using the following USB ports for external USB devices


PI4 occupied USB port diagram


PI5 occupied USB port diagram


[] Make sure the Raspberry Pi USB probe is not oxidized. If it cannot be recognized, you can try to use a blade to remove the oxide layer on the probe surface.



TAG: ESP32 S3 Development Board 2.41 inch AMOLED Display 600x450 TouchScreen For Arduino LVGL With SD-Port/ QMI8658C 6-Axis Sensor ESP32 C3 SpotPear Industrial-grade isolated 4-way RS485 hub repeater One RS485 TO Four RS485 RV1106 ESP32 S3 Development Board 1.47 inch LCD Touch Screen 1.47inch Display 172×320 SD AXS5106L JD9853 Raspberry Pi Pico 1024×600 360° ESP32 C3 LCD DeepsSeek XiaoZhi AI Voice Chat ESP32-S3 1.54 inch LCD Kit N16R8 WROOM-1-N16R8 DevKitC-1 Development Board 3.4inch Round LCD HDMI Capacitive Touchscreen Display 800x800 For Raspberry Pi/Jetson Nano/mini PC Arducam Raspberry Pi 5 Case Pan-Tilt Kit ESP32-S3FH4R2-MINI-Tiny-Stamp-WIFI-Bluetooth5 SpotPear PC USB Monitor Screen Industrial Modbus POE ETH RJ45 To Relay 30CH RTU/Modbus TCP-Ethernet For IOT Sipeed NanoCluster Mini Cluster Board mini data center For Raspberry Pi CM45 / Computer /LM3H /M4N X1300 X1300-A2 Raspberry Pi 5 HDMI to CSI-2 Shield 1080P@60fps & Audio & Video Also