• sales

    +86-0755-88291180

Jetson Nano IMX219-160 Camera User Guide

Introduction

IMX219 Camera, 800 megapixels and 160 FOV. Compatible with Jetson nano. You can also use it with CM3/CM3+ expansion boards like Raspberry Pi Compute Module IO board, Compute Module IO Board Plus, Compute Module POE Board of Waveshare and the StereoPi board.


Hardware connection

  • Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink
  • Connect a HDMI LCD to Jetson Nano

Software setting

  • Power on Jetson Nano and open the Terminal (Ctrl+ALT+T)
  • Test camera with command:
DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e
  • If you find that the image captured is red. You can try to download .isp file and installed:
wget https://www.waveshare.com/w/upload/e/eb/Camera_overrides.tar.gz
tar zxvf Camera_overrides.tar.gz 
sudo cp camera_overrides.isp /var/nvidia/nvcam/settings/
sudo chmod 664 /var/nvidia/nvcam/settings/camera_overrides.isp
sudo chown root:root /var/nvidia/nvcam/settings/camera_overrides.isp

TAG: 1.83inch LCD TouchScreen Display 240×280 NV3030B Arduino Raspberry Pi ESP32S3 Pico STM32 Raspberry Pi Mipi Raspberry-Pi-Pico-W-webserver Jetson Orin NX Case Raspberry Pi Autofocus Camera Milk-V Duo S Extend Partition on SD Card or eMMC Raspberry-Pi-ESP32-Pico-Display-image-1.83inch-LCD-NV3030B-ADD-NEW-Picture Milk-V Duo User Guide Raspberry Pi LCD 3D Display ESP32 UART USB Bus Servo ST RSBL Driver board For Raspberry PI Robot Raspberry Pi IR Ther Supports Night Vision Camera ESP32 S3 Development Board 2.8 inch Round LCD Display 480x480 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino ESP32 C3 Industrial Isolation USB TO RS232/485/422/TTL FT232RNL Serial UART Converter ESP32-C3-Ornament-Trinket-LVGL-Astronaut-Clock-Watch-MINI-TV-1.69inch-Round-LCD-TouchScreen-ST7789-240x280 ESP32-S3 QMI8658A Raspberry Pi 5 ST servo driver