【Note】

[] Support AI : Qwen2.5, DeepSeekV3, Doubao (1.5 Professional Edition), QwenMax2.5

[] AI Voice Chat Only Support the Following Country  :  

+86 Mainland China、+852 Hong Kong China、+853 Macau China、+886 Taiwan China、+1 United States/Canada、+44 United Kingdom、+33 France、+39 Italy、+49 Germany、+48 Poland、+41 Switzerland、+34 Spain、+60 Malaysia、+61 Australia、+62 Indonesia、+63 Philippines、+64 New Zealand、+65 Singapore、+66 Thailand、+81 Japan、+82 South Korea、+84 Vietnam、+91 ​​India、+92 Pakistan、+234 Nigeria、+880 Bangladesh、+966 Saudi Arabia、+971 United Arab Emirates、+55 Brazil、+52 Mexico、+56 Chile、+54 Argentina、+20 Egypt、+27 South Africa、+254 Kenya、+255 Tanzania

【Product Show】

【Overview】

[] This is a development board equipped with ESP32-S3 2.4GHz WiFi and BLE 5 modules, integrated with 16 MB Flash and 8 MB PSRAM. It has a 3.13-inch 376×960 resolution TFT color screen with RGB interface, and supports voice recognition and near/far-field voice wake-up.

ESP32-S3-AI-3.13inch-LCD

3.13 inch TFT color screen development board

【Main components】

[] Mainboard: ESP32-TPCB313

[] Main controller: ESP32-S3-WROOM-1-N16R8

[] LCD: 3.13-inch 376×960 resolution TFT color screen with RGB interface

【Component Introduction】

[] ESP32-S3-WROOM-1: The ESP32-S3-WROOM-1-N16R8 module is a general-purpose Wi-Fi + low-power Bluetooth MCU module equipped with the ESP32-S3 series chip. In addition to a rich set of peripheral interfaces, the module also has powerful neural network computing and signal processing capabilities, suitable for a variety of application scenarios in the AIoT field, such as wake-up word detection and voice command recognition, face detection and recognition, smart home, smart home appliances, smart control panels, smart speakers, etc. The memory FLASH capacity is 16MB and the PSRAM size is 8Mb

[] Mic: Onboard analog microphone

[] Audio codec chip: The audio codec chip ES8311 is a low-power mono audio codec that includes a single-channel ADC, a single-channel DAC, a low-noise preamplifier, a headphone driver, digital sound effects, and analog mixing and gain functions. It connects to the ESP32-S3-WROOM-1 module via I2S and I2C buses to provide hardware audio processing independent of audio applications.

[] Speaker output: MX1.25 can realize external speaker playback function through the support of audio power amplifier.

[] Sensor I²C interface: can connect various I²C sensors

[] Reset button: pressing this button alone will reset the system.

[] Boot button: when long pressing the Boot button, voice input can be performed

[] Power indicator: lights up when working

[] Power button: power on/off button

[] USB to serial chip: USB to serial chip CH343P, supports up to 6M baud rate

[] USB Type-C interface: ESP32-S3 USB interface, used for power supply, burning program, charging battery interface MX1.25 Two-pin interface for connecting a single lithium-ion battery.

[] Battery Charge Management IC: The constant current/constant voltage linear power management chip ET9742 can be used for charging management of single-cell lithium-ion batteries and charging batteries connected to the battery interface through the Micro USB port.

[] System LED: Two general-purpose LEDs (green and red), green for power and the rest for charging status.

[] LCD connector: A 0.5 mm pitch FPC connector for connecting the LCD expansion board.

【Size】

[] ESP32-S3-AI-3.13inch-LCD-EN【No Case】

[] ESP32-S3-AI-3.13inch-LCD-EN-With-Case【With Case】

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com