• sales

    +86-0755-88291180

USB-HUB-7U User Guide

Feature

  • Onboard 7-U USB extension port and compatible with USB 2.0/1.1 transmission.
  • Adopts industrial HUB chip and MTT technology, and allows stable and smooth concurrent 7-U USB connections.
  • ESD protection in each USB port, preventing electric surge damage and data loss.
  • Over-voltage protection, effectively preventing other high voltage power input from damaging the connected devices.
  • Multiple protection circuits: over-voltage, over-current, short circuit, over-temperature, reverse current, under voltage lock-out, 8KV ESD protection, filtering protection, etc.
  • LED indicators for monitoring operating statuses of power supply, network port, and USB ports.
  • Industrial grade metal case, rugged & durable, with mounting holes for easy installation.

Hardware Connection

  • Only supports 5V, and it will automatically power off when the voltage is too high.
  • 7 x USB output ports and its maximum output current is 1.2A. Exceeding this limit will trigger short-circuit protection, which requires the removal of the device to restore.
  • The operating temperature: -40 ℃~85 ℃. Note that there is no condensation, and this module is not waterproof.
  • LEDs indicate the enumerable situation of each USB. If there is one USB is connected and enumerated successfully, the corresponding LED will be on.


Specification

Interface StandardUSB 2.0
Communication RateTheoretically up to 480Mbps
USB HUB
Input
Working Voltage: 5V
Interface Form: USB-B type port
USB OutputWorking Voltage: 5V@Imax: 1.2A
Interface Form: USB-A type port
External Power SupplyPower Supply Voltage: DC 5V
Interface Form: DC power supply terminal
Operating Environment-40℃ ~ 85℃
Operating SystemCompatible with: Mac OS (version 8.6 and above), Linux (kernel version above 2.4.20), Windows 11 / 10 / 8.1 / 8 / 7 / XP
  ① up to 1.2A Max output current for each USB port, when there's enough power input.
  ② comes with 5V 2A power supply, it is recommended to use another 5V 4A or above power supply for higher USB loads.

Interface Introduction



Dimensions



TAG: 3.52 inch e-Paper HAT B E Ink Red/Black/White 360x240 Screen Display For Arduino /Raspberry Pi /Jetson Nano /STM32 ESP32 C3 MINI TV spotpear Raspberry Pi ESP32-S3FH4R2 Matrix 8x8 RGB-LED-WiFi Bluetooth QST Attitude Gyro Sensor QMI8658C Arduino Python USB TO RS485 Industrial Modbus RTU Dual Ethernet RJ45 To 8ch POE ETH Relay (C) PoE Power over Ethernet Raspberry Pi 5 8mp Camera ESP32 P4 Development Board WIFI6 3.4 inch LCD Round Display 3.4inch TouchScreen 800×800 Dual Microphones Computer Milk-V Duo RJ45 Python HTTP Request Communication Mobile Robot Industrial Isolation USB TO RS232/485/422/TTL FT232RNL Serial UART Converter Raspberry Pi 5 User Guide Sipeed MaixCAM Pro AI Camera Kit SG2002 RISC-V YOLO OpenCV Audio WIFI6 Linux Board IMU MicroPhone Speaker Raspberry Pi Buzzer ESP32 S3 N16R8 Development board 1.9 inch LCD Display 1.9inch TouchScreen 170×320 SD-Port RGB LED QMI8658 6-Axis ST7789 CST816 Industrial Isolated RS485 TO ETH (C) RJ45 Converter Wall/Rail-Mount For Modbus spotpear