• sales

    +86-0755-88291180

ISX031C-GMSL-Camera-H100 User Guide

Introduction

The ISX031C-GMSL-Camera-H100 camera module adopts ISX031C CMOS image sensor with built-in Image Signal Processor (ISP) and Maxim GMSL2 serializer (MAX96717F), compliance with Automotive-grade performance and features high-quality image effect after professional image tuning; The module is also equipped with an automotive-grade Active Alignment (AA) lens, and can achieve the IP67 protection rating.

Parameters

SENSORModel2.95MP ISX031 RGGB
Resolution1920 × 1536
CMOS size1/2.42inch
Pixel size3.0um × 3.0um
CAMERAField Of View100°(H) × 78°(V)
Focal length3.55mm
Aperture (F)1.6
Distortion-58%
ISPBuilt-in
FRAME RATE1920 × 1536@30fps
HDR (HIGH DYNAMIC RANGE)Support
LFM (LED FLICKER MITIGATION)Support
OUTPUT FORMATYUV422@8bit
SERIALIZERMAXIM MAX96717F
CONNECTORGMSL2 (Amphenol Fakra Z Buckle connector)
OPERATING VOLTAGE9 ~ 16V PoC
OPERATING CURRENT<200mA@12VDC
OPERATING TEMPERATURE-20°C ~ 65°C
PROTECTION DEGREEIP67

User Guide

  • This product is a GMSL camera that needs to work with the GMSL adapter board. For more details, you can refer to MAX9296-GMSL-Camera-Board.

Resource

Driver

Dimensions


Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Mobile: +86  13434470212

Email: services01@spotpear.com

TAG: ESP32-S3 SIM7670G 4G Development Board With Camera LTE Cat-1/4G/GNSS/GPS Global Band Portable WIFI FT4232HL USB TTL RS232 Industrial UART 4-Ch UART Image extraction User Guide Raspberry Pi Pico HDMI LuckFox Raspberry Pi 5 Raspberry Pi 5 AI kit Hailo8 26Tops PCIe to M.2 NVMe HAT Plus For Pi5 ESP32 S3 Development Board 2.8 inch Round LCD Display 480x480 QMI8658 Sensor / MIC / SD /MP3 Audio /Battery Port LVGL/HMI For Arduino X1203 Raspberry Pi 5 UPS Board Uninterruptible Power Supply For Li-Battery (NOT includ) USB TO M.2 Key B 5G DONGLE For SIM8202/SIM8262/RM520/RM530 Serial UART Bus Servo ST3020 TTL 25KG.CM Magnetic-Encoder High precision and Large torque X1202 Raspberry Pi 5 UPS Board Uninterruptible Power Supply For 18650-Li-Battery (NOT includ) 4-Ports spotpear ESP32-S3 Luckfox Pico PLUS Raspberry Pi CM5 Compute Module 5 Dual Gigabit Ethernet RJ45 Expansion IO Base Board ESP-IDF download and installation Raspberry Pi CM5 Compute Module 5 Development Kit With CM5104032 + Official Original IO Board + Case ESP32 S3 5 inch LCD Development Board 800x480 TouchScreen Display TVBOX LVGL HMI Sensor CAN RS485 Raspberry Pi 5 RTC charge configuration