ESP32-S3 Mini Development Board ESP32-S3-Zero based on ESP32-S3FH4R2 dual-core processor User Guide

Overview

The ESP32-S3-Zero mini development board is based on the ESP32-S3FH4R2 dual-core processor and allows for the breakout of most pins within a small form factor. It utilizes a half-hole process and can be soldered onto custom boards.

Features

Equipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE)
Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM
Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
Integrated with USB serial port full-speed controller, 34 × GPIO pins allows flexibly configuring pin functions
4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, 2 × ADC, etc.

Code

RGB_TestCode

Software

Data manual

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Raspberry Pi 5 CR2032 VGA to LVDS NVIDIA Jetson Orin Nano/NX PoE Mini Expansion Board Power over Ethernet RJ45 802.3af compliant ADXL354C Development Board Jetson Orin Case ESP32-C3FN4 Raspberry Pi Pico 2 RP2350-One Mini Board Type-A RP2350A Raspberry Pi Pico 2 RP2350 GEEK 1.14 inch LCD 240x135 65K SWD/UART/I2C For OpenOCD/CMSIS-DAP 128x128 Raspberry Pi LCD Raspberry Pi DSI 800×480 series bus servos Raspberry Pi Pico Raspberry Pi 5 X1006 Raspberry Pi 5 PCIe To 2.5 SATA And M.2 KEY-B 2280 SSD/HDD Double-SATA (NOT BOOT From SATA/SSD Raspberry Pi 5 DSI Bookworm Raspberry Pi Pico UGV Beast PT Kit AI OpenCV Robot Car MediaPipe For Jetson Orin Workstation electronic Nameplate development board

ESP32-S3-Zero User Guide