• sales

    +86-0755-88291180

Raspberry Pi 1.54 inch e-Paper HAT+ (G) E-Ink Red/Yellow/Black/White 200x200 Screen Display For Arduino /STM32/Jetson

$6.75

Brand:SpotPear
SKU:010606100000
Date:2025-03-03 13:37
No:
In Stock

1.54-inch electronic ink screen module

Low power consumption, wide viewing angle, clear display even when power is off, used for display applications such as shelf labels, industrial instruments, etc.

1.54 inE-ink screen module


Low power consumption, wide viewing angle, clear display even when power is off

For display applications such as shelf labels, industrial instruments, etc.


Version selection


Features

  • No backlight is required, and the last screen display content can be kept for a long time when the power is off. The power consumption is very low, and basically only consumes power when refreshing. Provide a complete supporting manual (driver board schematics, Raspberry Pi / Jetson Nano / Arduino and other sample programs) The following is only applicable to the module version SPI control interface, which can be connected to the main control board such as Raspberry Pi / Jetson Nano / Arduino. The onboard level conversion chip is compatible with 3.3V and 5V microcontroller interfaces
  • No backlight required, the last screen display can be kept for a long time after power failure
  • The power consumption is very low, basically only consuming power when refreshing
  • Provide complete supporting manuals (driver board schematics, Raspberry Pi / Jetson Nano / Arduino and other sample programs)The following applies only to the module version
  • SPI control interface, can be connected to Raspberry Pi / Jetson Nano / Arduino and other main control boards

  • Onboard level conversion chip, compatible with 3.3V and 5V microcontroller interfaces


    Product Parameters


    Operating voltageBare screen version: 3.3VDisplay ColorRed, yellow, black, white
    Module version: 3.3V / 5V
    Communication interface3-wire SPI、4-wire SPIGrayscale2
    DimensionsBare screen version: 37.32 × 31.8 × 1.00 (mm)Fast refresh15s
    Module version: 48.00 × 33.00 (mm)Global Refresh20s
    Display size27.0 × 27.0 (mm)Refresh power consumption<30mW
    Dot Pitch0.135 × 0.135 (mm)Sleep current<0.01uA (close to 0)
    Resolution200 × 200 pixelsViewing Angle>170°


    Advantages of E-Ink Screen


    The electronic ink screen uses "microcapsule electrophoretic display" technology to display images. Its working principle is that charged nanoparticles suspended in liquid migrate under the action of the electric field, and form a display effect close to traditional printed paper through reflection under ambient light. The electronic ink screen can display images clearly under ambient light such as light and natural light, without backlight, and the viewing angle is almost 180°. Because its display effect is comparable to that of traditional paper, it is often used in applications such as readers.



    SPI control interface


    Can be connected to Raspberry Pi / Jetson Nano / Arduino and other main control boards


    VCC3.3V / 5V
    GNDGND
    DINSPI communication MOSI pin
    CLKSPI Communication SCK Pin
    CSSPI chip select pin (active low)
    DCData/command control pin (high level indicates data, low level indicates command)
    RSTExternal reset pin (low level reset)
    BUSYBusy status output pin


    Onboard level conversion chip


    Compatible with 3.3V and 5V microcontroller interfaces


    Application Scenario


    Applicable to shopping mall price tags, asset equipment labels, electronic shelf labels, conference name tags, etc.


    Product size

    Naked screen version


    Module version