PCIe-TO-PCIe x1-Board-C User Guide

Overview

PCIe FFC connector to standard PCIe x1 slot adapter board (c) for raspberry pi 5, compatible with PCIe x1, x4, x8, and x16 interface devices

Features

PCI-E×1 connector with slot on the back, compatible with PCIe x1 x4 x8 x16 devices
Only supports PI5B
Onboard working indicator, PWR stays on when powered on
Onboard DC power supply, can be powered by DC round hole or through 4PIN connector

Usage Instructions

Hardware Connection

Pay attention to the direction of the wiring, if the PCIe slot is connected in the wrong direction, the PCIe card will be damaged, as shown in the figure:

Boot PCIe

1. Enable PCIE interface

PI5B defaults to enabling the PCIE interface.
If it fails to boot, add the following to /boot/firmware/config.txt:
dtparam=pciex1

2. PCIE is gen2 by default, if you need to enable PCIE gen3, then add following to /boot/firmware/config.txt:

dtparam=pciex1_gen=3

Resources

FAQ

Question: Can it work without 12V power supply?

Answer:

Whether or not to supply 12V is related to the PCIe card used. Most of them do not require 12V power supply, and need to be directly supplied to the PCIe card, instead of supplying 12V to the board.

Support

Monday-Friday (9:30-6:30) Saturday (9:30-5:30)

Mobile: +86 13434470212

Email: services01@spotpear.com

TAG： RM520N GL 5G/4G/3G M.2 Moudle IoT EMBB For LTE-A/NSA/SA And GNSS For DFOTA /VoLTE For Quectel Industrial USB TO 8CH TTL Converter USB to UART Multi Protection Circuits Multi Systems How to install Esp32 by espressif systems ESP-IDF download and installation ESP32-S3 RS232 to RS485 Raspberry Pi Pico Changeable Photo XIAO-nRF52840 Plus 20GPIOs BLE Sense Tiny SuperMini Onboard Mic/Sensor For Arduino For SeeedStudio Arduino Thermal imaging camera Modbus-Protocol-Specification User Guide Raspberry Pi 9.7 inch e-Paper HAT+ (E) E-Ink E6 Full color 1120x784 Screen Display For Arduino /STM32 /ESP32/Jetson Nano Raspberry Pi linux board ESP32-P4-Core Board with 32MB PSRAM USB With Camera Port / Display Port EVAL-ADXL354CZ EVAL BOARD 1.54 inch Passive NFC e-Paper BW Display E-ink Screen No Need Battery Wireless Powered & Data Transfer WiFi Wireless ESP32 DDSM Motor Driver HAT For Direct Drive Servo Hub Motors For Raspberry Pi 800×480 Allwinner

Price：

$11.9

Model：

PCIe TO PCIe x1 Board (C)

Raspberry Pi 5 PCIe FFC Connector to Standard PCIe x1 Slot (C) Expansion Board

[Tutorial Navigation]

Overview

Features

Usage Instructions

Hardware Connection
Boot PCIe

Resources
FAQ

Question: Can it work without 12V power supply?

Support