Raspberry Pi 1.54inch Game LCD User Guide

Introduction

The 1.54inch lcd work with Raspberry Pi zero/zero 2/3B/4B/CM4, Support Raspbian and Retropie

Operating voltage: 3.3V
Interface: SPI
LCD type: TFT
Display Controller: ST7789V
Touch Controller: XPT2046(The Retropie OS don't support touch)
Resolution: 240*240 （software 480x480）

Use our pre-configured Images

->Raspbian

1.54inch-LCD-Raspios-Bookworm-240315_240615.zip(Work for All Pi' Version)
1.54inch-LCD-Raspios-buster-211202_211210.zip(Not work for Pi5)
1.54inch-LCD-Raspios-bullseye-211030_211210.zip(Not work for Pi5)

->Retropie (Not work for Pi5)

Install the driver at yourself image

->Work with Retropie (Not work for Pi5)

Display configuration tutorial ：

fbcp-9341:higher fps or device tree:higher compatibility

Joystick configuration tutorial
Audio configuration tutorial (Need to buy extra GPIO audio module )
Game Full screen setting

->Work with Raspbian-Bookworm ( Work For All Pi' Version)

Display configuration tutorial (Bookworm Lite For All Pi' Version )
Display configuration tutorial (Bookworm Desktop For Pi4 & Pi5 )
KEY CODE

->Work with Raspbian-Old buster&bullseye (Not work for Pi5)

Display configuration tutorial
Touch configuration tutorial
Touch calibration tutorial
Audio configuration tutorial (Need to buy extra GPIO audio module )
KEY CODE

ROMs

rom-500.zip (Other game roms , unzip it and copy it to nes folder )

700in1.zip (Just copy it to nes folder not need unzip it )

Driver , Code and configuration files

Software

Chip manual

Schematic

1.54inch LCD_Schematic

Size file

Pinout

See Pinout from here

ROMs

rom-500.zip (Other game roms , unzip it and copy it to nes folder )

700in1.zip (Just copy it to nes folder not need unzip it )

Driver , Code and configuration files

Images

->Raspbian

->Retropie

Software

Chip manual

Schematic

1.54inch LCD_Schematic

Size file

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Raspberry Pi 3.5 inch e-Paper link (G) RYBW 384x184 For Arduino / Jetson Nano / STM32 X1202 Raspberry Pi 5 UPS Board Uninterruptible Power Supply For 18650-Li-Battery (NOT includ) 4-Ports X1004 Spotpear SIM8230G M2 3G/4G/5G/GNSS/GPS Sub-6G PCIe M.2 Moudle For LTE-A/NSA/SA For DFOTA /VoLTE For SIMCOM Raspberry Pi display Jetson Nano Module Raspberry Pi 5 PCIe to SATA Expansion Board with EEPROM HAT+ Raspberry Pi 5 Official Red-White Case Raspberry Pi CSI-to-HDMI ESP32 C3 LCD Raspberry Pi Display RP2040 R7FA4 Plus A Board Based on R7FA4M1AB3CFM Compatible with Arduino UNO For R4 Minima ESP32-S3 USB Dongle Modbus RTU Relay 32CH Raspberry Pi LCD Serial UART Bus Servo ST3215 30KG.CM/19.5KG.CM Magnetic Encoder 360° High Precision And Large Torque Milk-V Duo S 512MB SG2000 RISC-V Serial UART Bus Servo ST3215-HS 20KG.CM High Speed Magnetic Encoder 360° Large Torque