• sales

    +86-0755-88291180

Raspberry Pi CM4-to-CM3-Board User Guide

  Overview

Raspberry Pi Compute Module 4 CM4 to CM3 Adapter CM3+ Adapter board converted from cm4

  Resource comparison

The adapter board calls CM4 resources

CM4-to-CM3-BoardCM4
HDMIHDMI0
GPIO0~27GPIO0~27
GPIO28、GPIO29GPIO44(SDA0)、GPIO45(SCL0)
GPIO31、GPIO33CAM_GPIO
GPIO30、GPIO32、GPIO33~45NC
CSI0CSI1
CSI1CSI0
DSI0DSI1
DSI1DSI0
USB2.0USB2.0
SDIOSDIO

  Onboard resources


  • CM4 connector: connect CM4

  • CM4 working status light: used to judge whether CM4 is working

  • MP28164: DC buck-boost chip

  • Power supply selection: the resistor on the left - direct power supply; the resistor on the right - power supply after passing through the DC buck-boost chip (default)

  • IO level selection: select the IO level of CM4 (3.3V is selected by default)

  • CM3 interface: used to connect to the CM3 backplane

TAG: Raspberry Pi 5 Official Original PCIe to M.2 NVMe SSD Raspberry Pi M.2 HAT+ Board For Pi5 Pi5 Fan Good low light performance SpotPear Luckfox Pico RJ45 Raspberry Pi Triple Screen HAT Raspberry Pi Pico 2 RP2350 GEEK 1.14 inch LCD 240x135 65K SWD/UART/I2C For OpenOCD/CMSIS-DAP DeepSeek AI Voice Chat ESP32 S3 Development Board 1.83 inch TouchScreen Display 240x284 Raspberry Pi 7 inch DSI MIPI LCD TouchScreen Display 7inch 720x1280 For Luckfox Lyra RK3506/ESP32-P4/Luckfox Omni3576 Raspberry Pi 5 DSI User Guide ESP32-P4-WIFI6 3.5inch LCD Display AI Development Board 320×480 3.5 inch TouchScreen Deepseek 2.13Inch E-Ink Milk V Duo ESP32 S3 AI 1.85 inch Development Board with 1.85inch LCD Touchscreen Round Screen Electronic Badge Deepseek UART To CAN STM32 0.96inch RGB OLED Raspberry Pi 5 USB to CAN ESP32 S3 4inch LCD Development Board 480x480 TouchScreen Display TVBOX LVGL HMI Sensor CAN RS485 JETSON-NANO-MINI