【Overview】

[] ESP32-S3 infrared thermal imaging module

[] 80 × 62 pixel infrared array, 45° / 90° field of view

【Version selection】

【Features】

[] This is a wireless infrared thermal imaging device based on the ESP32-S3-WROOM-1 main control module. It uses a hybrid technology of microbolometer and thermopile pixels and has an 80 × 62 pixel infrared array. The module can detect the infrared radiation energy distribution of objects within the lens field of view in real time, and generate surface temperature distribution maps and thermal imaging images of objects through quantitative processing. In addition, the module integrates charging and discharging circuits and reserves a battery interface for users to connect battery modules for power supply.
[] Key Features:
[] Equipped with ESP32-S3-WROOM-1 module, equipped with Xtensa 32-bit LX7 dual-core microprocessor, the main frequency can reach 240MHz, providing powerful data processing capabilities

[] Onboard antenna, supports 2.4 GHz WIFI (802.11 b/g/n) and Bluetooth 5 (LE) dual-mode communication

[] Built-in 512KB SRAM and 384KB ROM, stacked 8MB PSRAM and external 16MB Flash

[] Use Type-C interface to improve device compatibility and user convenience

[] Onboard RGB LED indicator, real-time display of module operation status, easy to monitor and maintain equipment

[] Onboard 3.7V MX1.25 lithium battery charging and discharging interface, supports flexible power supply scheme, and prolongs the power supply time of the device

[] Provides 2 × 10 pad interface, including 14 GPIO, 1 I2C and 1 UART, supports external device expansion functions

[] Compact design, improves device space utilization, suitable for embedded application scenarios

【Multiple viewing angles】

[] Two viewing angles: 45° and 90°, to flexibly meet the needs of different scenarios

【Support PC software】

[] Support TCP communication, AP / STA mode preview, support Windows system

【Support APP Bluetooth connection】

[] Provide Android APP to facilitate configuration of module parameters

The Bluetooth APP is only used to configure the module's IP, device name and other parameters. It does not support viewing thermal images.

【Support battery powered solution】

[] Equipped with 3.7V MX1.25 lithium battery charging and discharging interface, flexible power supply, allowing the module to run offline

【Delicate and lightweight】

[] Modular design, lightweight but fully functional

【Support for ESP-IDF】

[] Equipped with a complete SDK and open source materials, it is easy to use and can be quickly embedded into the application

【Application】

【Pin Description】

【Interface Introduction】

【Size】

[] Thermal-45 Camera ESP32 Module

[] Thermal-90 Camera ESP32 Module

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com