• sales

    +86-0755-88291180

(Not released-Not for sale-Only product introduction) Chip RP2350A / RP2350B / RP2354A / RP2354B For Raspberry Pi Pico 2 ARM Cortex-M33 Hazard3 RISC-V

$2

Brand:Raspberry Pi
SKU:0101633
Date:2024-08-16 17:11
No:
Out of Stock

RP2350 is the new high-performance, secure microcontroller from Raspberry Pi. With a higher core clock speed, double the on-chipSRAM, more powerful Arm cores, optional RISC-V cores, new security features, and upgraded interfacing capabilities,RP2350 delivers a significant performance and feature boost over its predecessor,RP2040.

Raspberry Pi Pico 2 RP2350 Recommend

【Note】

 []  The product is not yet released and its sale depends on official Raspberry Pi arrangements. 

 []  For now, this link is only for product introduction and show purposes. 

[] The webpage price is not the actual final price. The final price will be based on the official Raspberry Pi release. 

[] It is uncertain whether this product can be sold externally; further notification from the official Raspberry Pi team is required.

【Manual】

RP2350-datasheet.pdf

RP2350-RP2350-AB-product-brief.pdf


【Overview】


[] RP2350 is the new high-performance, secure microcontroller from Raspberry Pi. With a higher core clock speed, double the on-chipSRAM, more powerful Arm cores, optional RISC-V cores, new security features, and upgraded interfacing capabilities,RP2350 delivers a significant performance and feature boost over its predecessor,RP2040.

[] RP2350provides a comprehensive security architecture, built around Arm TrustZone for Cortex-M, and incorporating signed boot, 8KB of antifuse OTP for key storage,SHA-256 acceleration, a hardware TRNG,and fast glitch detectors. These features,including the secure boot ROM, are extensively documented and available to all users without restriction: this transparent approach, which contrasts with the "security through obscurity" offered by legacy vendors, allows professional users to integrate RP2350 into products with confidence.

[] The unique dual-core, dual-architecture capability of RP2350 allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 RISC-V cores. Three high-performance Programmable I/0(PIO) co-processors,with a total of twelve independent state machines, support software-defined interfacing,with little or no CPU overhead.

[] RP2350 offers best-in-class performance for a vast range of applications, from cost-optimised embedded computing, to secure applications requiring trusted firmware, to industrial loTdeployments with demanding I/O requirements. It is available in four package variants: with 30 or 48 GPIO pins, and with or without2MB stacked flash memory.

【Key features】

CPU: Dual Arm Cortex-M33 or dual Hazard3RISC-V processors@ 150MHz

Memory: 20KB on-chip SRAM, in ten independent banks

[] Support for up to 16 MB of externalQSPI flash/PSRAM via dedicated QSPI bus; additional 16 MB flash/PSRAM accessible via optional second chip-select

Peripherals: 2xUART

[] 2x SPI controllers

[] 2x12C controllers

[] 24 x PWM channels

[] 4/8x ADC channels

[] 1 x USB 1.1 controller and PHY, with host and device support

[] 12 x PIO state machines

Security features: Optional boot signing, enforced by on-chip mask ROM, with key fingerprint in OTP

[] Protected OTP storage for optional boot decryption key

[] Global bus filtering based on Arm or RISC-V security/privilege levels

[] Peripherals, GPIOs, and DMA channels individually assignable to security domains

[] Hardware mitigations for fault injection attacks

[] Hardware SHA-256 accelerator

Compliance: For a full list of local and regional product approvals, please visit pip.raspberrypi.com

【RP2350 block diagram】


【60QFN pinout】


GPIOX:General-purpose digital input and output

GPIOx/ADCy:General-purpose digital input and output, with analogue-to-digital converter function

QSPIx:Interface to an SPI, Dual-SPI or Quad-SPI flash device, with execute-in-place support

USB_DM and USB_DP:USB controller, supporting full-speed device and full-/low-speed host

XIN and XOUT:Connect a crystal to RP2350's crystal oscillator

RUN:Global asynchronous reset pin; reset when driven low, run when driven high

SWCLK and SWDIO:Access to the internal Serial Wire Debug multi-drop bus; provides debug access to

both processors

GND:Single external ground connection, bonded to a number of internal ground pads othe RP2350 die

QSPI_I0VDD:Provides the IO supply for the chip's QSPI interface

IOVDD:Power supply for digitalGPIOs, nominal voltage 1.8 V to 3.3V

USB_OTP_VDD:Power supply for internal USB full-speed PHY and OTP, nominal voltage 3.3 V

ADC_AVDD:Power supply for analogue-to-digital converter, nominal voltage 3.3 V

VREG_VIN:Power input for the internal core voltage regulator, nominal voltage2.7 V to 5.5V

VREG_FB:Internal core voltage regulator: See datasheet

VREG_LX:Internal core voltage regulator: See datasheet

VREG_PGND:Internal core voltage regulator: See datasheet

VREG_AVDD:Internal core voltage regulator: See datasheet

DVDD:Digital core power supply, nominal voltage 1.1V

【60QFN physical specification】

【80QFN pinout】


GPIOX:General-purpose digital input and output

GPIOx/ADCy:General-purpose digital input and output, with analogue-to-digital converter function

QSPIx:Interface to an SPI, Dual-SPI or Quad-SPI flash device, with execute-in-place support

USB_DM and USB_DP:USB controller, supporting full-speed device and full-/low-speed host

XIN and XOUT:Connect a crystal to RP2350's crystal oscillator

RUN:Global asynchronous reset pin; reset when driven low, run when driven high

SWCLK and SWDIO:Access to the internal Serial Wire Debug multi-drop bus; provides debug access toboth processors

GND:Single external ground connection, bonded to a number of internal ground pads othe

RP2350 die

QSPI_I0VDD:Provides the IO supply for the chip's QSPI interface

IOVDD:Power supply for digitalGPIOs, nominal voltage 1.8 V to 3.3V

USB_OTP_VDD:Power supply for internal USB full-speed PHY and OTP, nominal voltage 3.3 V

ADC_AVDD:Power supply for analogue-to-digital converter, nominal voltage 3.3 V

VREG_VIN:Power input for the internal core voltage regulator, nominal voltage2.7 V to 5.5V

VREG_FB:Internal core voltage regulator: See datasheet

VREG_LX:Internal core voltage regulator: See datasheet

VREG_PGND:Internal core voltage regulator: See datasheet

VREG_AVDD:Internal core voltage regulator: See datasheet

DVDD:Digital core power supply, nominal voltage 1.1V

【80QFN physical specification】