• sales

    +86-0755-88291180

Raspberry Pi Pico 2 RP2350 CAN Onboard XL2515 CAN Controller RP2350A

$11.69

Brand:SpotPear
SKU:010166000000
Date:2025-04-10 10:32
Part Number:
No:
In Stock

RP2350 CAN Development Board Based on Raspberry Pi RP2350A dual-core dual-architecture processor 150MHz operating frequency Onboard XL2515 CAN controller

RP2350-CAN Development Board

Based on the Raspberry Pi's official self-developed RP2350A

Compatible with most Raspberry Pi Pico modules


Product Features

  • Uses the RP2350A microcontroller chip independently developed by Raspberry Pi
  • Unique dual-core, dual-architecture, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, running at clock frequencies up to 150MHz
  • Built-in 520KB SRAM and 4MB on-chip Flash
  • Onboard XL2515 CAN controller, fully supports CAN V2.0B technical specification, communication rate up to 1 Mbps
  • Uses Type-C interface, no need to worry about whether to plug it in the right or wrong direction
  • Stamp hole design, can be directly welded and integrated into the base plate designed by the user
  • Supports USB1.1 host and device
  • Supports low power sleep and hibernation modes
  • Drag-and-drop downloading via USB recognized as mass storage
  • 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC, and 16 controllable PWM channels
  • Precise on-chip clocks and timers
  • Built-in temperature sensor
  • On-chip accelerated floating point library
  • 12 Programmable I/O (PIO) state machines for custom peripheral support

Support C/C++, MicroPython

Complete SDK and open source tutorials are provided to make it easy to get started and can be quickly embedded into applications

Dual-core, dual-architecture processor

Equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard 3 RISC-V processor
Clock frequency up to 150MHz

Onboard XL2515 CAN controller

It fully supports CAN V2.0B technical specifications and can send and receive standard frames, extended frames, and remote frames. When used with the SIT65HVD230 transceiver, the maximum communication rate can reach 1 Mbps.


26 multi-function GPIO pins

Supports configuration pin function, which can be easily and flexibly developed and integrated

Resource Overview

  1. RP2350A

    Dual-core, dual-architecture processor running at up to 150MHz

  2. P25Q32SH-UXH-IR

    4MB NOR-Flash

  3. BOOT button
  4. RESET button
  5. MP28164

    High Efficiency DC-DC Buck-Boost IC

  6. LED Light

    User indicator light (not power indicator light)

  7. USB Type-C port

    Used to download programs and supports USB1.1 host and slave devices

  1. DEBUG interface
  2. SIT65HVD230DR

    CAN Transceivers

  3. XL2515QF20

    CAN Controller

  4. Terminal resistance selection

    Connect or disconnect 120R matching resistor

  5. CAN transceiver interface
  6. Pin interface

    Compatible with Raspberry Pi Pico standard interface

Product size