Raspberry Pi 5 PoE MINI HAT (H) 5V/5A Power over RJ45 Ethernet 802.3af/at Moudle for Pi5/CM5

Raspberry Pi 5 PoE MINI HAT (H) 5V/5A Power over RJ45 Ethernet 802.3af/at Moudle for Pi5/CM5

$22

Brand：SpotPear

SKU：010313100000

Date：2025-03-27 11:10

Part Number：

PoE HAT (H) PoE HAT (H) Acce A

No：

- +

In Stock

Buy It Now

Add to cart

Ask a Question

Copy Link

Raspberry Pi 5 dedicated Ethernet PoE power supply expansion board 5V 5A stable performance supports 802.3af/at network standards using isolated switch mode power supply

Raspberry Pi POE Recommend

Gigabit-PoE-Switch-120W

RPi-PoE-HAT-(E)

RPi-PoE-ETH-USB-HUB

RPi-PoE-HAT-F

PoE-M.2-HAT+

PoE-HAT-H

PoE M.2 HAT+ (B)

Raspberry Pi 5 PoE MINI HAT(G)

Pi5-POE-PD-A

Pi5-POE-PD-B-With-Cooler-PCIe

Raspberry Pi 5 Power over Ethernet expansion board

For Raspberry Pi 5 / CM 5, supports IEEE 802.3af/at network standards

Onboard 5V interface to meet the needs of official shells

Version selection

Product Features

A Power over Ethernet (PoE) expansion board for Raspberry Pi 5 / CM 5, supporting IEEE 802.3af/at network standards. Suitable for use with a PoE router or switch that supports IEEE 802.3af/at network standards. Only one network cable is needed to connect the Raspberry Pi to the Internet and power it.

Based on Raspberry Pi 40PIN GPIO interface
Support PoE Ethernet power supply and IEEE 802.3af/at PoE network standard
Onboard imported IC solution, PoE power supply performance is more stable
Using isolated switch mode power supplies
Small and easy to assemble

Product Parameters

PoE expansion board
PoE power input	38V ~ 57V DC input
Power Output	GPIO pin header: 5V 5A (MAX)
Product size	56.5 × 65.0 (mm)
Web Standards	Supports IEEE 802.3af/at PoE

Raspberry Pi official case with built-in fan
Input voltage	5V DC (powered by Raspberry Pi 5 fan connector)
Fan speed control	Pulse width modulation control with tachometer
Air volume	2.79 CFM (Max)
Fan speed	8000 RPM ± 15%（Max）
Housing Material	ABS (base, frame, cover) and PC (fan assembly)

For Raspberry Pi 5 / CM 5

Based on the Raspberry Pi 40PIN GPIO interface design, easy to assemble into the official shell

One network cable for power supply

Just connect a network cable to a PoE device to connect the Raspberry Pi 5 / CM 5 to the Internet and power it

The picture is for display only. This product is not compatible with Raspberry Pi 5 and 120W switch.

With official shell

With official radiator

The pictures are for display only. This product does not include Raspberry Pi 5 and radiator. Please refer to the configuration list for detailed configuration.

Application Showcase

With this product, you can use a PoE-enabled Ethernet cable to directly power the Raspberry Pi 5 / CM 5

The pictures are for display only. Please refer to the configuration list for detailed configuration.

Product size

[] PoE HAT (H)

[] PoE HAT (H) Acce A

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!