• sales

    +86-0755-88291180

Raspberry Pi 1.54inch LCD-Retropie-Audio configuration tutorial

Download audremap18.dtbo to your pi
sudo cp audremap18.dtbo /boot/overlays/
sudo nano /boot/config.txt
Add this code
dtoverlay=audremap18,pins_18_19
(audremap18.dtbo just enable gpio18 as pwm audio pin,
This Above code will not enable gpio19 as pwm audio pin,
gpio19 have configured as key START)

After rebooting , You need enable local audio

sudo raspi-config  Select System Options -> Audio -> 'headphone'

Go to retropie menu


Select  ->  AUDIO  ->  HEADPHONE

Then reboot again use sudo reboot 

Set audio voice max

Press key START enter retropie MAIN MENU


select SOUND SETTING
->SYSTEM VOLUME 100
->AUDI0 DEVICE   ->  HEADPHONE

->OMX PLAYER AUDIO DEVICE   -> LOCAL

Go back press key B
Then enter SOUND SETTING ->SYSTEM VOLUME again
You will see it is 97 or 77,You need set it 100 again|
After all settingthe VOLUME will became ok

TAG: ESP32 S3 AI 4.3inch (C) Industrial Development Board 4.3 inch TouchScreen Display Sensor CAN I2C RS485 DeepSeek SpotPear OLED-LCD-HAT-A Raspberry Pi 5 Sound 7inch-USB-Monitor user guide Raspberry Pi 5 ABS Case DeepSeek XiaoZhi AI Voice Chat Robot BOX ESP32-S3 Development Board 3.5 inch QSPI LCD N16R8 Touchscreen Display 6-Axis /Camera /SD Ra ESP32-S3 AI 1.54-inch e-Paper Ink Screen 1.54inch Display AIoT Development Board Deepseek DeepSeek AI Voice Chat Robot ESP32 S3 Development Board 2.8 inch Display 2.8inch Screen X1200 Raspberry Pi 5 UPS Board Uninterruptible Power Supply For 18650-Li-Battery (NOT includ) Raspberry Pi 5 DSI display ESP32 S3 LCD Camera Development Board 2 inch Display QMI8658 Sensor / Battery Port LVGL/HMI For Arduino Milk-V Duo Information Industrial USB TO 4CH RS232/485/422/TTL Serial UART Converter FT4232HL 3.5inch RPi LCD (A) Manual Configuration JETSON NANO MINI Expansion Board LoRa32-Heltec V4 ESP32-S3 LoRa SX1262 Development Board 863-928MHz Meshtastic For Arduino Python UART Communication Industrial RS485 Modbus RTU Relay