• sales

    +86-0755-88291180

Raspberry Pi ETH/USB HUB HAT (B) User Guide

Introduction

Ethernet / USB HUB HAT (B) for Raspberry Pi Series, 1x RJ45, 3x USB 2.0

Pinout

  • The lEDs turn on if USB ports are enumerated successfully.

Hardware connection

  • To use with Raspberry Pi zero, the HUB HAT works with ejector pins
  • To use with other Raspberry Pi, the HUB HAT should be connected with USB cable


TAG: ESP32 S3 4.3inch LCD (B) 800x480 Captive TouchScreen Display Board LVGL with Sensor CAN I2C RS485 ESP32-S3 1.69inch Touchscreen LCD Round Display WiFi Bluetooth With QST Attitude Gyro Sensor QMI8658 Raspberry Pi 3.5 inch LCD F Display Capacitance TouchScreen 60fps ST7796 GT911 320x480 Also For Arduino/Pico2/ESP32/RP2040/RP2350 RP204 0.85inch LCD Raspberry Pi Camera V2 Sensor Development Board WiFi6 Development Board ESP32 Thermal imaging Windows Environment User Guide Raspberry Pi 5 Pure-Copper Active Cooler Pi5 PCIe Arduino MEGA2560 R3 Modbus RTU Relay 32CH Milk V Duo IO Board Tutorial Industrial Isolation USB TO RS232/485/422/TTL FT232RNL Serial UART Converter Raspberry Pi 5 Argon-NEO-M.2-NVME-PCIE-Expansion-Board Only For Argon NEO 5 Case (Not include) UART TTL To RS485 C Built-In Protection Circuits ESP32-S3 1.28 SpotPear STM32 0.85inch LCD