RP2350-One Type-A
a Pico-like MCU board based on Raspberry Pi RP2350A
Castellated Module, Suitable For SMD Applications
Board Specifications
- RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
- Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz
- 520KB of SRAM, and 4MB of on-board Flash memory
- Type-A connector, keeps it up to date, easier to use
- Castellated module allows soldering directly to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 29 × multi-function GPIO pins (20× via edge pinout, others via solder points)
- 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 12 × Programmable I/O (PIO) state machines for custom peripheral support
On-board Type-A male port
Plug and play, no need for additional cables
C/C++,MicroPython
Complete SDK and open source tutorials are provided to make it easy to get started and can be quickly embedded into applications
Dual-core, dual-architecture processor
Onboard dual-core ARM Cortex-M33 + dual-core Hazard3 RISC-V processors
Running at up to 150 MHz
29 multi-function GPIO pins
Supports configuration pin function, which can be easily and flexibly developed and integrated
Resource Overview
- PCB Type-A
- RT9013-33GB
500mA low dropout, low noise, ultra-fast LDO
- WS2812
RGB LED
- BOOT
- W25Q32JVSSIQ
4MB NOR-Flash
- RESET
- RP2350A
Dual-core, dual-architecture processor, up to 150MHz operating frequency
- RP2350A Pin extraction
Lead out 10 pins (to be soldered), 9 of which are GPIO pins.
- Debug
Product size
To:
Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!
Email(support)
services01@spotpear.com