- sales/support
Google Chat: zj734465502@gmail.com
- sales
+86-0755-88291180
- sales01
sales01@spotpear.com
- sales02
dragon_manager@163.com
- support
services01@spotpear.com
- CEO-Complaints
manager01@spotpear.com
- sales/support
WhatsApp:13246739196
- HOME
- >
- PRODUCTS
- >
- ESP32 Series
- >
- Display
- >
- ESP32C6-Display
ESP32 C6 Development board 1.9 inch LCD display 1.9inch Screen 172×320 With SD slot RGB LED QMI8658 6-Axis-Sensor ST7789 CST816
$16.9
ESP32-C6 1.9 inch 172×320 resolution 262K color Wi-Fi 6 LCD screen development board 160MHz RISC-V processor supports 90 hardware rotation.
ESP32 Display Recommend
ESP32-C6
1.9-inch LCD screen development board
170 × 320 resolution, built-in ST7789V2 display driver chip, supporting 90 hardware rotation.
Version selection
Product characteristics
This product adopts ESP32-C6FH8 chip, supports 2.4GHz Wi-Fi 6 and BLE 5 Bluetooth functions, stacks 8MB Flash, and has a 1.9-inch LCD screen on board, which can run GUI interface programs such as LVGL smoothly. On-board QMI8658 six-axis sensor, Micro SD card slot, lithium battery charging and other peripheral resources, and reserved Pico compatible pin interface, which has strong compatibility and expansibility, and can quickly develop HMI and other applications of ESP32-C6.
- Equipped with ESP32-C6 high-performance 32-bit RISC-V processor, the main frequency is as high as 160MHz.
- Support 2.4GHz Wi-Fi 6 (802.11 ax/b/g/n) and Bluetooth 5 (LE), onboard antenna.
- Built-in 512KB HP SRAM, 16KB LP SRAM and 320KB ROM, with 8MB Flash.
- On-board 1.9-inch LCD screen with 170 × 320 resolution and 262K color can clearly display color pictures.
- On-board QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope) can detect motion attitude and expand its application.
- On-board USB Type-C interface can be used for power supply, download and debugging, which is convenient for development and use.
- Charge and discharge interface of onboard 3.7V MX1.25 lithium battery
- On-board Micro SD card slot, which can be connected with SD card to store pictures or files.
- On-board Pico compatible interface leads to rich peripheral interfaces, which has strong compatibility and expansibility.
LCD screen parameters
| display panel | LCD | Display size | 1.9inch |
|---|---|---|---|
| display resolution | 170 × 320 | Display color | 262K |
| Display brightness | 500cd/m² | contrast | 900:1 |
| communication interface | SPI | Driving IC | ST7789V2 |
| touch control | Support (with touch version only) | Touch IC | CST816 (Touch version only) |
Application scenario
Support ESP-IDF, Arduino
Well-equipped SDK, open source materials tutorial, easy to use, can be quickly embedded in the application.
Support Wi-Fi 6 and BLE 5.
ESP32-C6 integrates 2.4GHz Wi-Fi 6 (802.11 ax/b/g/n) and can support 40MHz bandwidth. Its low-power Bluetooth subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh.
Interface definition
On-board Pico compatible interface, which can adapt to some raspberry pie Pico expansion boards, has strong compatibility and expansibility.
Brief introduction of resources
- ESP32-C6FH8
8Mb Flash is encapsulated, and the running frequency is as high as 160MHz.
- TCA9554
Expand 8-channel GPIO chip to improve IO flexibility.
- MX1.25 3.7V lithium battery interface
Used to connect lithium batteries and support charging and discharging functions.
- RESET button
System reset, easy to debug
- USB Type-C interface
Support power input and data transmission
- Micro SD card slot (back)
Used for extended storage, supporting Micro SD card.
- Charging indicator lamp
Lights up when charging, and goes out when charging.
- BOOT button
Used to download programs or enter boot mode.
- WS2812 (back, touch-free version only)
RGB lamp beads support colorful light effects.
- QMI8658 (back)
IMU six-axis inertial sensor (3-axis gyroscope+3-axis accelerometer)
- IPEX1 external antenna interface (touch version only)
Need to modify solder joint access
- Patch ceramic antenna
On-board antenna design, saving space and stable signal.
