Dear Sirs,
The blue LED on a Milk-V DuoS did not blink.
Is there anything I should try?
I recieved a Milk-V DuoS with no eMMC and no Wifi yesterday.
I used the flash tools both balenaEtcher and Rufus to burn image.
I tried three 16GB micro SD card and two SD card reader/writer.
Below is the content of the serial output.
*** milkv-duos-sd-v1.1.1-2024-0528.img
WD.C.SCS/0/0.WD.URPL.USBI.USBW/1000.USBL.BS/EMMC.EMI/25000000/12000000.
E:bm_emmc_send_cmd_without_data CMD: 1 INT_STAT: 0x
E:bm_emmc_send_cmd_without_data CMD: 0 INT_STAT: 0x E:eMMC init failed, 3
E:eMMC initializing failed
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
E:Boot failed (8).
E:RESET:plat/mars/platform.c:114
*** milkv-duos-sd-v1.1.0-2024-0410.img
WD.C.SCS/0/0.WD.URPL.SDI/25000000/6000000. E:Mount SD failed (13)
USBI.USBW/1000.USBL.BS/EMMC.EMI/25000000/12000000.
E:bm_emmc_send_cmd_without_data CMD: 1 INT_STAT: 0x
E:bm_emmc_send_cmd_without_data CMD: 0 INT_STAT: 0x E:eMMC init failed, 3
E:eMMC initializing failed
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
E:Boot failed (8).
E:RESET:plat/mars/platform.c:114
*** milkv-duos-sd-v1.0.8-2024-0130.img
WD.C.SCS/0/0.WD.URPL.SDI/25000000/6000000. E:Mount SD failed (13)
USBI.USBW/1000.USBL.BS/EMMC.EMI/25000000/12000000.
E:bm_emmc_send_cmd_without_data CMD: 1 INT_STAT: 0x
E:bm_emmc_send_cmd_without_data CMD: 0 INT_STAT: 0x E:eMMC init failed, 3
E:eMMC initializing failed
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
PS. E:bm_emmc_send_cmd_without_data CMD: 6 INT_STAT: 0x E:load param1 (-5)
E:Boot failed (8).
E:RESET:plat/mars/platform.c:114
--
Jun Mizutani
