Raspberry pi USB-HUB-2IN-4OUT User Guide

Introduction

Industrial Grade USB HUB, Extending 4 x USB 2.0 Ports, Switchable Dual Hosts.

Features

4 x extended USB ports, switchable two inputs, sharing USB devices for two hosts.
Industrial grade HUB chip
ESD protection for each USB port, preventing electric surge damage and data loss.
Over-voltage protection, effectively preventing other high voltage power input from damaging the connected devices.
Multiple protection circuits: over-voltage, over-current, short circuit, over-temperature, reverse current, under-voltage lock-out, 8KV ESD protection, filtering protection, etc.
Industrial grade metal case, rugged & durable, with mounting holes for easy installation.

Hardware Connection

Connect a 5V power adapter to the device, the inside protective circuit will cut off the power if the input voltage is too high.
Four USB output ports, support up to 1.2A current. The short-circuit protection is activated if the current is over 1.2A and you need to remove the device to restore it.
Working temperature range: -40°C ~ 85°C (No condensate).
The LED1 ~ LED4 are the indicators of USB ports, light on if the USB device is connected and success to be enumerated.
PWR is the power indicator.

Question:The LEDx don't light on after connecting devices and the HUB cannot work normally.

Answer:

Please check if you have connected the correct power adapter.
Check whether the USB device was shorted.
Check the USB device first at another PC and check if the related driver was installed.

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： Raspberry Pi 5 DSI Bookworm UGV Rover ROS2 PT AI OpenCV Robot Car MediaPipe For Jetson Orin Nano 3D Display Raspberry Pi Pico Camera Raspberry Pi 5 PCIe to M.2 Multi Function Adapter Board Supports Dual 4K HDMI Output Raspberry Pi Raspberry Pi 12.3 inch LCD HDMI /Type C Display In-Cell Capacitive TouchScreen 1920x720 For Jetson Nano/mini Computer PC LCD Screen Driver Board RP2040 ESP32 UART USB Bus Servo ST RSBL Driver board For Raspberry PI Robot ESP32-S3 Industrial USB TO RS485 2CH Converter FT2232HL Grade Isolated Arducam 64MP Camera Industrial Modbus RTU 8 ch Relay Module 1.83inch LCD TouchScreen Display 240×284 ST7789P For Arduino /Raspberry Pi /ESP32 /Pico /STM32 Pico-DALI2 Expansion Board For ESP32 C6 S3 DALI communication control multiple LED 1.5inch LCD TOF Time-Of-Flight Laser Range Sensor Radar Module UART / I2C Port pcb800099-v.9 树莓派Pico 2 RP2350B-Plus-W开发板WIFI官方Radio Module 2