Raspberry Pi 4-CASE-ARGON-ONE

User guide

The fan and power button can only work with the driver. You can directly refer to the manual which comes with the case.

Open terminal of Raspberry Pi, install the driver by the following command

curl https://download.argon40.com/argon1.sh | bash

After installation, two shortcuts are added to the desktop, "configure" and "uninstall", they can be used to configure and uninstall the driver.
The default setting of the fan is:

CPU temperature	Fan speed
55°C	10%
60°C	55%
65°C	100%

You can also use commands to configure and uninstall driver

argonone-config  #configure driver
argonone-uninstall  #uninstall driver

Power button

Raspberry Pi status	Button	Function
Shutdown	Press	Start
Working	Long-press (>3s)	Shutdown
Working	Press(<3s)	No function
Working	Double-click	Restart
Working	Long-press(>5s)	Force shutdown

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com

TAG： AI Board SpotPear Pi5 Fan USB to JTAG Raspberry Pi ZERO Camera Industrial RS485 Modbus RTU Relay Raspberry Pi 5 RTC charge Raspberry Pi 5 8mp Camera Industrial USB to RS485 Converter Jetson Nano 4G module 3.5inch RPi LCD (A) Manual Configuration Raspberry Pi 5 Audio Jack Raspberry Pi Camera DPI Interface Milk V Raspberry Pi Pico 1024×600 RP2040 Arduino MLX90640 Spotpear Arduino-check-library-path

PI4-CASE-ARGON-ONE

User guide

To：

Email(support)

Raspberry Pi 4 Case Aluminum Case Raspberry Pi 4 ARGON ONE