ESP32-S3-AI-DIY-Kit-(B) User Guide

1】firmware downloa

2】Firmware burning

】Download and open the burning software

Burn_tool download

】How to use

Just burn the factory firmware, as shown in the picture

Burned successfully, you can restart.

3】Deepseek Xiaozhi AI Guide Video

[] Connect to WIFI

After powering on, the device will automatically open an AP named Xiaozhi F4A5. Connect to this AP with your phone and wait for a moment. The network page will pop up, automatically searching for hotspots in the current environment. Select your hotspot and enter your password to complete the network. After the network is completed, the screen will get the device code.

Note: Some mobile phones will automatically disconnect the hotspot and use the 5G network once they find that the hotspot cannot connect to the Internet. At this time, you need to connect to the AP again. If the network configuration page does not pop up after connecting to the AP, please enter 192.168.4.1 on the mobile browser to open it.

[] Enter the settings backend

https://xiaozhi.me

[] Click console/【控制台】

[] Click manage devices/【管理设备】

[] Click add device/【添加设备】

[] Set English answer and DeepSeek

Click【配置角色】->【英文老师】->【语言模型】Choose Deepseek V3->【保存设置】

[] Restart the device

Restart the device and it will be ready for use later

TAG： OLED-LCD-HAT-A E-Paper Raspberry Pi Transparent LCD Jetson Nano Development Kit JETSON-NANO-DEV-KIT Replace For Jetson-Nano-Developer-Kit-B01 Raspberry Pi CSI-to-HDMI Jetson Orin 5G/4G/3G expansion board GNSS GPS RM520N-GL SpotPear 800×480 DC-DC Step-Down Mini voltage Moudle Input 5~36V voltage Output 5V/3.3V 4A Raspberry Pi display ESP32 S3 Development Board 4.3 inch LCD Capacitive Touch Screen 4.3inch Display 480×272 N16R8 Arducam RTL8723 WIFI SDIO Expansion Module Board For Luckfox Pico Mini B /Luckfox Pico Plus /Luckfox Pico Pro /Luckfox Pico Max Raspberry Pi 5 PCIe to SSD ESP32 LVGL Core3566002000 Raspberry Pi 5.83 inch e-Paper link (G) RYBW 800x480 For Arduino / Jetson / STM32 /ESP32 Raspberry Pi Pico RP2040 1.69 inch TouchScreen Round LCD Display With QMI8658/Buzzer/RTC For Arduino Milk-V Duo RJ45 Tutorial Raspberry Pi 5 CR2032

DeepSeek AI Voice Chat ESP32-S3 All-in-One-PCB-Kit N16R8 WROOM-1-N16R8 DevKitC-1 Development Board

[] Connect to WIFI
[] Enter the settings backend
[] Click console/【控制台】
[] Click manage devices/【管理设备】
[] Click add device/【添加设备】
[] Set English answer and DeepSeek
[] Restart the device