• sales

    +86-0755-88291180

RP2040-LCD-0.99-B User Guide

【Overview】

[] RP2040 Microcontroller LCD Development Board: Designed based on Raspberry Pi's RP2040 with a CNC metal enclosure.


【Features】

RP2040-LCD-0.99-B is a high-performance and cost-effective microcontroller product designed by Waveshare, featuring a 0.99-inch circular LCD screen (with a non-arc-shaped bottom edge in the display area) and peripherals like a six-axis sensor (three-axis accelerometer and three-axis gyroscope). It integrates a Raspberry Pi-designed RP2040 microcontroller chip and exposes 4 GPIO pins through the SH1.0 6PIN connector, making it convenient for development and embedding into applications.


Key Features:

[] Uses the RP2040 microcontroller chip designed by Raspberry Pi

[] Equipped with dual-core ARM Cortex M0+ processor, running at a flexible clock frequency of up to 133MHz

[] Built-in 264KB SRAM and 2MB on-chip Flash

[] USB Type-C interface for modern connectivity, with reversible insertion

[] Onboard 0.99-inch 125x115 resolution, 65K color IPS LCD display (non-arc-shaped bottom edge in the display area) for clear color image display

[] Exposes 4 GPIO pins through the SH1.0 6PIN connector

[] CNC metal upper shell and acrylic matte bottom plate on the back

[] USB 1.1 host and device support

[] Supports low-power sleep and deep sleep modes

[] Recognizable as a high-capacity storage device for drag-and-drop program downloads via USB

[] 2 I2C, 4 12-bit ADC

[] Precise on-chip clock and timer

[] Temperature sensor

[] On-chip accelerated floating-point library

[] 8 programmable I/O (PIO) state machines for custom peripheral support

[] Supports C/C++, MicroPython, Arduino, with comprehensive SDK, open-source materials, and tutorials for easy integration into applications.


【Resource Introduction】


1. USB Type-C Interface

Used for program downloads and supports USB 1.1 host and device functions.


2. RT9013-33GB

500mA low dropout, low noise, ultra-fast LDO.


3. QMI8658C

Six-axis Inertial Measurement Unit (IMU) with a 3-axis gyroscope and a 3-axis accelerometer.


4. W25Q16JVUXIQ

2MB NOR-Flash.


5. RP2040

Dual-core processor with a maximum operating frequency of 133MHz.


6. SH1.0 6PIN Connector

Exposes 4 GPIO pins, arranged from top to bottom as: GND, 3V3, GP26~GP29.


7. BOOT Button

Press the BOOT button while powering on to enter download mode.


【Dimensions】

TAG: EchoEar 1.85 inch Round TouchScreen 1.85inch QSPI LCD 360*360 CST816T ST77916 RM520N GL 5G/4G/3G M.2 Moudle IoT EMBB For LTE-A/NSA/SA And GNSS For DFOTA /VoLTE For Quectel Lichee-Tang-Primer-20K-FPGA-Unboxing ESP32 ST7789 ESP32 C3 Round LCD Development Board Electronic EYE 0.71 inch Display Watch Screen GC9D01 160x160 Raspberry Pi IR Array Thermal Imaging Camera Far infrared 80×62 Pixels 45/90 Degree FOV Multi Protection USB Binocular Camera 2MP AR0144 Distortion Free Binocular Synchronous Frame USB 2.0 Plug and Play Spotpear Banana Pi ADXL354C Evaluation Board 101M-8001280-IPS-CT-K User Guide ESP32 C3 Round LCD Development Board Electronic EYE 0.71 inch Display Watch Screen GC9A01 160x160 Raspberry Pi 5 Aluminium Case Raspberry Pi LCD Capacitive TouchScreen Display HDMI 6.25inch 720x1560 Raspberry Pi 5 Milk-V Duo RJ45 ESP32 JETSON NANO B01 BPI