【Overview】

[] UPS Plus is a new generation UPS power management module that supports OTA firmware upgrades and features a built-in RTC clock.

[] It features two INA219 chips on the board to monitor battery voltage and voltage output from UPS Plus to Raspberry Pi.

[] It supports automatic startup upon power recovery and battery temperature detection. Users can program the Raspberry Pi to obtain current and voltage information through Python programming, making it convenient for DIY uninterrupted power supply solutions. It also supports fast charging via USB Type-C and charging through the MicroUSB port.

[] Compatible with: Raspberry Pi A/A+/B/B+/2B/3B/3B+/4B

【Feature】

[] Easy installation

[] Enhanced power management

[] Remote OTA firmware upgrades

[] Programmable BACK-TO-AC automatic power restoration

[] Programmable sampling intervals

[] I2C communication

[] Independent RTC clock

[] Supports stackable battery design for expandable battery capacity

Please note: Stackable power boards may require special accessories and may not support official None accessories.

【Specifications and Features】

[] Current/voltage monitoring for the Raspberry Pi power port.

[] Current/voltage monitoring for the battery terminals, supporting bidirectional charging and discharging monitoring.

[] Power estimation.

[] Note: At least one complete charging and discharging cycle must be completed!

[] Supports FCP, AFC, and SFCP fast charging protocols.

[] Supports BC1.2 charging protocol.

[] Battery temperature monitoring.

Note: The forced temperature protection function cannot be disabled. Protection threshold: 65 degrees.

[] Programmable Power Voltage Detector (PVD) function, default value: 3.6V.

[] Automatic startup on power recovery.

[] Power outage memory function.

[] Programmable shutdown/forced reboot.

[] Runtime statistics.

[] Electrostatic protection.

[] Linear compensation range for discharge capacity: 5V 4.5A.

[] Non-linear compensation range for discharge capacity: 5V 8A.

[] Charging capacity: 4.5V 5A / 5V 2.5A / 9V 2A / 12V 1.5A.

[] Uses I2C communication without occupying other ports.

[] Supports 4.2V, 4.35V, 4.4V, and 4.5V lithium batteries.

Note: Different types of batteries cannot be mixed!

【Resource Overview】

[] UPS-Plus  x1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com