【Features】

[] 64×128 resolution OLED display, 65K colors, clear and colorful displaying effect

[] SPI interface, minimizes required IO pins

[] Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

【Specifications】

[] Operating voltage: 3.3V/5V

[] Support interface: 4-wire SPI, 3-wire SPI

[] Controller: SSD1357

[] Resolution: 64 (RGB) x 128

[] Display Dimension: 10.8624 (W) x 21.736 (H)mm

[] Pixel size: 0.0327 (W) x 0.146 (H)mm

[] Display color: 65K color

【Control Interface】

[] VCC : Power (3.3V / 5V input)

[] GND : Ground

[] DIN : SPI data input

[] CLK : SPI clock input

[] CS : Chip selection, low active

[] DC : Data/Command selection (high for data, low for command)

[] RST : Reset, low active

【Hardware Connection】

[] Connecting With Raspberry Pi

[] Connecting With Arduino Board

【Usage Example】

[] for reference only, the STM32 board is NOT included.

【Outline Dimensions】

[] 0.96inch RGB OLED Module x1

[] GH1.25 7PIN cable x1

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com