• sales

    +86-0755-88291180

5DP-CAPLCD User Guide

Overview

Introduction

5DP-CAPLCD is a universal capacitive touch screen with high resolution and is compatible with most standard HDMI devices.
It boasts a toughened glass capacitive touch panel that results in a smooth multi-touch effect while being thin and lightweight.
The baseboard has integrated interfaces, which enables users to integrate it into an all-in-one project more conveniently.

Features

  • 5-inch IPS screen with a hardware resolution of 1024x600, and the software resolution can reach up to 1920x1080.
  • 5-point capacitive touch, with toughened glass panel, hardness up to 6H.
  • Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
  • Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
  • Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.)
  • Support HDMI audio output, onboard 3.5mm headphone jack, and 4PIN speaker jack.

Parameters

ItemDescriptionUnit
Model5DP-CAPLCD/
Size5.0Inch
Viewing Angle178Deg
Resolution1024×600Pixels
Display Area108.03(H)×64.8(V)mm
Pixel Pitch0.1055(H)×0.1080(V)mm
Color Gamut58%NTSC
Maximum Brightness800cd/m²
Contrast800:1/
Backlight AdjustmentOSD Menu Brightness Adjustment/
Refreshing Rate60Hz
Display InterfaceStandard HDMI Interface/
Touch PortType-C Interface/
Power PortType-C Interface/
Power Consumption4.2Watt

Electrical Specifications

ParameterMinimum ValueStandardMaximum ValueUnitNote
Input Voltage4.755.005.25VNote 1
Input Current800850TBDmANote 2
Operating Temperature02560Note 3
Storage Temperature-102570Note 3

•Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
•Note 2: The input current must be ≥850mA, otherwise, it will cause startup failure or abnormal display, and it may cause permanent damage to the device if it is in an abnormal state for a long time.
•Note 3: Please do not store the display in a high-temperature and high-humidity environment for a long time. The display must work within the limited value range, otherwise, the display may be damaged.

Onboard Interface


User Guide

Working with Raspberry Pi

How to Assemble

Preparation

Please prepare the following wires. Here we take Raspberry Pi 5 as the connection example:

Step 1

Connect the wires ①②③ to the corresponding position as shown in the picture:

Step 2:

Connect the wire ① to the ④ LCD adapter (select ④ or ⑤ according to your Raspberry Pi model), and then connect it to the micro HDMI interface of Raspberry Pi.

Step 3

Connect the wire ② to the USB interface of the Raspberry Pi; and connect the wire ③ to the 5V GND pin of the Raspberry Pi.

Step 4

After connecting the wires as shown above, check the connection is correct and then connect it to the 5V power supply.

Software Setting

Support Raspberry Pi OS/Ubuntu/Kali and Retropie system.
When LCD works with the Raspberry Pi systems, you must set the resolution manually. Otherwise, the resolution is not correct and it will affect your experience.

1. Please download the latest image in the official Raspberry Pi website.
2. Download the compressed file on the PC and unzip it to get the ".img" file.
3. Connect the TF card to the PC and use SDFormatter to format the TF card.
4. Open Win32DiskImager, select the system image prepared in the first step and click "write" to program the system image.
5. After programming, you can open the "config.txt" file in the TF card root directory. Add the following code at the end of "config.txt", save it, and then safely remove the TF card.

hdmi_force_hotplug=1 
config_hdmi_boost=10
hdmi_group=2 
hdmi_mode=87 
hdmi_cvt 1024 600 60 6 0 0 0

6. Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, and wait for a few seconds for a normal display.

Working With PC

Support Windows 11/10/8.1/8/7

How To Use

  1. Connect the Touch port of the LCD to the USB port of the PC, and Windows will automatically identify the touch function.
  2. Connect the LCD to the PC via the HDMI interface, and Windows will automatically identify the display function.
  • Note:
  • Some PCs do not support the plug-and-play function of the HDMI device, but it can be used normally after restarting the system.
  • If the power supply of the USB port is insufficient, the LCD will flicker. After connecting an external 5V 1A power adapter to the Power interface of the LCD, it can be operated normally.

Windows Touch Calibration

Take Windows 10 as an example:

  • 1. Enter the Windows settings of the system, type in the search bar, and click "Calibrate the screen for pen or touch input" (as shown in the picture below):


  • 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:


  • 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.
【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)


Outline Dimensions

5DP-CAPLCD-H


5DP-CAPLCD-B


5DP-CAPLCD-G


TAG: Raspberry Pi MLX90641 TVOC Sensor gas Sensor Expansion board UART High Sensitivity For Arduino /Raspberry Pi /Pico /ESP32 Raspberry Pi DSI LCD Modbus RTU Relay 32CH Raspberry Pi Touch Display 2 Official Original Capacitive TouchScreen 7 inch LCD TFT 720x1280 Raspberry Pi Pico W PI5 Case Arducam 4 inch e Paper HAT+ E Ink Spectra E6 Full-Color 600x400 Screen Display For Arduino /Raspberry Pi /Jetson Nano /STM32 Raspberry Pi 3.5 inch LCD F Display Capacitance TouchScreen 60fps ST7796 GT911 320x480 Also For Arduino/Pico2/ESP32/RP2040/RP2350 Raspberry Pi5 Raspberry Pi 14 inch LCD 2K HDMI /Type C Display Capacitive TouchScreen 2160x1440 For Jetson Nano/mini Computer PC Raspberry Pi 5 Terminal Milk-V Duo S Usage of USB Type A interface Jetson Nano Expansion Board Accelerometer X1010 Raspberry Pi 5 PCIe FFC Connector to Standard PCIe x4 Slot Expansion Board Template: Pico-get-start ESP32-P4 ESP32-C6 Development Board RISC-V WiFi6 MIPI CSI Camera 7/10.1 inch DSI Display /RJ45 Ethernet /Mic /Audio Size Compatible with Raspberry Pi Milk V Duo