【Overview】
[] 8-Ch Ethernet Relay Module (B)

[] With Digital Input

[] Ethernet Port Communication, Modbus Protocol, PoE Power Supply

【Features At A Glance】

This product is an industrial 8-ch relay module controlled via Ethernet port, with 8-ch digital input, adopts Modbus RTU/Modbus TCP protocols, supports PoE power supply, also comes with an ABS rail-mount case.

The Modbus POE ETH Relay (B) is very easy to use. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirements.

[] Features flash-on, flash-off function, by passing argument to the command, it is possible to turn on the relay for a while and then close it automatically

[] Supports DC 7~36V wide range power input and PoE power supply

[] Supports relay control through MQTT protocol, comes with Alibaba Cloud MQTT application demo

[] Onboard Optocoupler isolation, prevent the relay from being interfered by high-voltage circuit

[] Adopts dedicated relay driver chip, with built-in flyback diode protection, for stronger and more stable driving ability

[] Supports passive and active digital input, with bi-directional optocoupler isolation, built in debouncing algorithm. The relay supports digital input linkage control or toggle control

[] Reverse-proof circuit, prevent the circuit from being damaged accidentally by incorrect connection

[] High quality relay, contact rating: ≤10A 250VAC/30VDC

[] Rail-mounted ABS plastic enclosure, easy to install, safe to use

[] 4 LEDs and Network indicators for indicating the MCU status and signal transceiving status
【Primary Function】
[] Supports Reading Digital Input By Sending Modbus RTU Protocol Commands Via Ethernet For Relay Output Control

【Supports Multiple Communication Modes, Adopts Modbus Protocol】
[] Supports TCP Server / TCP Client / UDP Mode / UDP Multicast / HTTP / MQTT

[] Supports Modbus RTU Protocol/Modbus TCP Protocol

【Multi Configuration Methods】
[] Supports Software And Web Browser Configuration, Obtaining Dynamic IP Via DHCP, Connecting To Domain Name Server Via DNS Protocol

【Multi Configuration Methods Multi Power Supply Options, Wide Range Power Input】

[] DC Power Port: Directly Uses A Power Plug For Power Supply; Screw Terminal: DC 7~36V Wide Range Power Input; PoE Port: IEEE 802.3af PoE Compliant

* The external power supply adapter is NOT included by default, it is recommended to purchase 12V power supply if you need it.

【Digital Input】

[] Supports Passive (Dry Contact) And Active (Wet Contact) Digital Input, With Bi-Directional Optocoupler Isolation

【Interfaces & Indicators】

[] With Multiple LED Indicators, Easy To Monitor The Operating Status


[] RUN Ethernet port indicator, blinking when Ethernet port normally working

[] STA MCU indicator, blinking when the MCU normally working

[] TXD TX indicator, lights up when sending data

[] RXD RX indicator, lights up when receiving data

[] ETHERNET PORT GREEN INDICATOR Lights up when the connection is established

[] ETHERNET PORT YELLOW INDICATOR Data activity indicator, blinking when transmitting data

【Multiple Modes For Various Automation Scenarios】

[] Supports Multiple Relay Control Modes, Each Channel Supports Independent

Control Mode Setting

【Relay Connection】

[] Contact Rating Of The Onboard Relay Up To 10A 250VAC/30VDC

[] Directly Controlling 220VAC Home Appliances, Or Devices Below 30VDC

【Enclosure Design】

[] Rail-Mounted ABS Plastic Enclosure, Easy To Install, Safe To Use

【Applications】

【Product Show】

【Outline Dimensions】

[] Modbus-POE-ETH-Relay-(B)

To：

Dear Customers, There may be a lag of several hours before we could process your order, depending on the time difference between your location and ours. Sincerely hoping your understanding!

Email(support)

services01@spotpear.com