Image2Lcd Image Modulo

The following steps are not applicable to four-color ink screen, seven-color ink screen, and four-grayscale ink screen images.
The black and white and red ink screen is composed of two black-and-white pictures, and the modulo is taken twice.
For RGB LCD screen please choose 16-bit or other colors.

Download Image2Lcd.7z and open the software.

Modify the maximum width and height, it is recommended to be consistent with the picture to be modulo next (here takes 1.54 black and white ink screen as an example).

Check if the data at the location shown in the picture is correct.

Set each value shown in the picture according to the actual situation of the screen and picture.

Click to save.

Select a c file, it will be opened in Notepad by default.

TAG： ESP32 1.5inch LCD Core3566104000 Raspberry Pi PICO Raspberry Pi 5 DSI display ESP32-S3 LCD Raspberry Pi 5 8mp Camera Core3566002032 Industrial USB to RS485 Converter Raspberry Pi Mini IPS HDMI to LVDS ESP32-S3 A7670E 4G development board supports LTE Cat-1/2G/GNSS positioning/WiFi/Bluetooth USB Monitor ESP32-S3 USB Dongle DDSM115 Direct Drive Servo Motor All-In-One Design Hub RS485 Motor Aluminum Heatsink Pi5 Active Cooler RS485 to RJ45 Jetson Nano 1.54inch OLED LuckFox Pico UART

Image2Lcd Image Modulo

BBC micro:bit